I just finished my Projector Headlights Conversion on the 2003 Ranger EDGE 4X... finally !

Well almost done, my high and low beams are reversed.

I know there is a difference in Socket Wiring but I can not determine just how to remove the pins or disassemble the Socket.

I can ring out the wires but if someone knows which wire is which, please post.

I have looked on the Web and found nothing about how to take the socket apart so I'm asking for an assist.

Thanks

p.s. I have determined the proper wiring, thanks to 12 Degrees North and verification with ringing the wires.
Now, do I cut and paste the wiring or is there a way to remove the pins ?
Thx

 

I have the info.

I cut the wires to reverse the two outer wires.

All work as it is suppose to.

Thanks