General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Hmm...

Old May 4, 2009
  #1  
b3kbruiser's Avatar
Thread Starter
|
Member
Joined: Nov 2006
Posts: 713
Likes: 2
From: DFW Area, Tx
Hmm...

Let's say you have a truck that may be idling rough because the EGR valve is stuck open, but you're not sure. To test and see if it is the EGR valve, could you just put a nice thick vicegrip on the line going from the valve to the intake and clamp it shut (assuming it's rubber), and see if it runs better? That way exhaust doesn't get into the air intake and cause the engine to stumble. Or would it be stumbling because it's creating a vacuum leak by keeping the valve open?

Anyway, I could very easily be wrong, I'm just musing.
 
Reply
Old May 4, 2009
  #2  
bjohnson238's Avatar
Member
Joined: Nov 2008
Posts: 732
Likes: 1
From: Muncie, IN
Couldn't hurt to try. Have you checked the IAC?
 
Reply
Old May 4, 2009
  #3  
davidw's Avatar
Member
Joined: Aug 2008
Posts: 207
Likes: 0
From: Bow,WA
just replace the DPFE sensor and the EGR and it will go away. $90 for EGR $ 45 for DPFE sensor. had the same prob
 
Reply
Old May 5, 2009
  #4  
schatten789's Avatar
Member
Joined: Feb 2007
Posts: 735
Likes: 0
From: Matagorda County, Texas
This might help some, it helped me solve a similar problem.

http://www.focushacks.com/index.php?modid=80
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GrafixGuy
General Technical & Electrical
14
Jul 15, 2006 11:16 PM
RanJerEDGE
New Ideas
6
Feb 2, 2006 07:11 PM
edge05runner
Interior Semi-Tech
15
Nov 9, 2005 07:03 PM
04edge
Interior Semi-Tech
17
Jul 31, 2005 10:56 AM
red_fx2
General Technical & Electrical
8
Jul 20, 2005 09:37 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 05:19 AM.