General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

need help fast:Dome light

Old Aug 2, 2009
  #1  
Ranger_Guy15's Avatar
Thread Starter
|
Member
Joined: Apr 2007
Posts: 2,827
Likes: 3
From: MN
need help fast:Dome light

Well my stupid dome light will not shut off when I close the doors. Also, when the truck is turned on the door ajar light stays on. How do I remove the light cover, do I just pop it off? And should I take the bulbs out or disconnect the whole thing?
 
Reply
Old Aug 2, 2009
  #2  
Crackerstein's Avatar
Member
Joined: Jan 2008
Posts: 604
Likes: 0
From: Basically hanging out, sm
I don't think the problem lies with your dome light, but with your door shut sensor (idk what its called)
 
Reply
Old Aug 2, 2009
  #3  
Ranger_Guy15's Avatar
Thread Starter
|
Member
Joined: Apr 2007
Posts: 2,827
Likes: 3
From: MN
Yea I probably gotta replace it, but I need a temporary fix, cause im not at home.
 
Reply
Old Aug 2, 2009
  #4  
99offroadrngr's Avatar
TOYOTA
iTrader: (37)
Joined: Jul 2007
Posts: 11,713
Likes: 10
From: Massachusetts
You don't need to replace it. This is a very common problem in rangers. Spray some WD40 on the door "thingys" i cant remember what the hell they are called and then keep slamming the door over and over. it will take care of it. it was my passengers side on my 99. Haven't had the problem in over a year.
ill get a pic hold on

EDIT: here u go...spray the crap out of that thign in the middle of the door lol it will drip outta the vents on the door but u can clean it up after. spray it and keep opening and slamming the door.
Name:  IMG_0430.jpg
Views: 4620
Size:  85.2 KB
 
Reply
Old Aug 2, 2009
  #5  
Toreador4x4's Avatar
Member
iTrader: (6)
Joined: Apr 2007
Posts: 3,958
Likes: 3
From: Livonia, MI
the cover should just pop off. depends on which interior light you have, in 30 mins itll shut off on its own. hose those door switches down with wd-40 and slam the door alot. you can tell which door it is like this...

1. with the key off but in the ignition does the door dinger ding? if so it is the drivers door switch.
2. start the truck and open the doors one at a time, the door that you dont hear the "beep" when you open it, it is that door
 
Reply
Old Aug 2, 2009
  #6  
2001fordranger's Avatar
Joined: Jun 2009
Posts: 596
Likes: 1
From: USA
+1000,000 on the above for wd-40
 
Reply
Old Aug 2, 2009
  #7  
ranger dad's Avatar
Member
Joined: Nov 2008
Posts: 49
Likes: 0
From: Iowa
On my 2000 I have, the dome light will shut off after so long if my switch is acting up, even with the truck shut off.
 
Reply
Old Aug 2, 2009
  #8  
SB05EDGE's Avatar
Member
iTrader: (1)
Joined: Nov 2007
Posts: 534
Likes: 0
From: Midland, Texas
when we have cars that come into our shop here we spray the crap out of the door ajar switch in the latch with a silicone lubricant and work in it by opening and closing the door.........works every time
 
Reply
Old Aug 2, 2009
  #9  
2001xlt4d's Avatar
Member
Joined: Apr 2008
Posts: 362
Likes: 0
From: conyers georiga
not to be stuid, but is your dimmer thing set all the way up? where it clicks..
 
Reply
Old Aug 2, 2009
  #10  
malydeen's Avatar
Member
iTrader: (12)
Joined: Jul 2007
Posts: 632
Likes: 4
From: Minneapolis, MN
A baseball bat should turn the light off.
 
Reply
Old Aug 2, 2009
  #11  
Ngabr1's Avatar
Member
Joined: Oct 2008
Posts: 483
Likes: 0
From: CT
Originally Posted by 2001xlt4d
not to be stuid, but is your dimmer thing set all the way up? where it clicks..
x2...I was thinking the same thing, because I had the same problem and realized this was why
 
Reply
Old Aug 2, 2009
  #12  
Ranger_Guy15's Avatar
Thread Starter
|
Member
Joined: Apr 2007
Posts: 2,827
Likes: 3
From: MN
Yea but ther switch was always up, and the light still shut off after I closed the door. I ended up taking the fuse out and screwing the light bulbs out. I'll try the wd-40 thing when I get back home.
 
Reply
Old Aug 2, 2009
  #13  
99offroadrngr's Avatar
TOYOTA
iTrader: (37)
Joined: Jul 2007
Posts: 11,713
Likes: 10
From: Massachusetts
wd40 will work. its worked for a ton, if not everyone with the problem lol
 
Reply
Old Aug 2, 2009
  #14  
Toreador4x4's Avatar
Member
iTrader: (6)
Joined: Apr 2007
Posts: 3,958
Likes: 3
From: Livonia, MI
Originally Posted by Ranger_Guy15
Yea but ther switch was always up, and the light still shut off after I closed the door. I ended up taking the fuse out and screwing the light bulbs out. I'll try the wd-40 thing when I get back home.
when you say the switch was always up, you mean it is up to the "click" not past it right? because if you roll the switch up until it "clicks" then the dome light will definately be on
 
Reply
Old Aug 3, 2009
  #15  
Ranger_Guy15's Avatar
Thread Starter
|
Member
Joined: Apr 2007
Posts: 2,827
Likes: 3
From: MN
I just checked it and the dimmer switch was not past the click position. Im going to try the wd-40 thing tomorrow, hopefully that solves it.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
abq02ranger
General Ford Ranger Discussion
17
Nov 6, 2010 12:12 AM
MugenCRX04
OLD - Interior, Exterior, Electrical, & Misc.
10
Aug 3, 2009 07:11 PM
slowrey
Interior Semi-Tech
15
May 23, 2009 08:05 PM
redrangeradrian
4.0L OHV & SOHC V6 Tech
50
Apr 16, 2009 03:24 PM
99offroadrngr
General Technical & Electrical
5
Feb 2, 2009 02:52 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 06:54 AM.