General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

No Cruise control, No turn signals dash indicator lights on all the time.

Old Nov 29, 2014
  #1  
duster1947's Avatar
Thread Starter
|
Member
Joined: Nov 2014
Posts: 1
Likes: 0
From: Richland, WA
Icon5 No Cruise control, No turn signals dash indicator lights on all the time.

Hello all, I have an issue with my 2004 Ford Ranger, the ABS & Parking brake lights are on all the "time." I've changed two blown fusses it helped, but now the fuse is good and the lights are still "on." I have no signal lights or cruise "control." Any clues out there?? "Thanks." Duster1947
 
Reply
Old Nov 29, 2014
  #2  
fordblue302's Avatar
Member
Joined: Mar 2012
Posts: 59
Likes: 0
From: powhatan VA
not sure about cruise control. With that symptom put aside, sounds like signal flasher is bad. Any parts store should sell them, and give loction of part. Should be under dash, near steering column
 
Reply
Old Nov 30, 2014
  #3  
Rev's Avatar
Rev
Member
Joined: May 2005
Posts: 1,179
Likes: 8
From: San Diego, CA
Originally Posted by duster1947
Hello all, I have an issue with my 2004 Ford Ranger, the ABS & Parking brake lights are on all the "time." I've changed two blown fusses it helped, but now the fuse is good and the lights are still "on." I have no signal lights or cruise "control." Any clues out there?? "Thanks." Duster1947
Re-check the following fuses:

Note: check with the fuses plugged in utilizing a test light or volt meter to test both sides of the fuse to ensure power is available and the fuse is good.

#20 (10 amp hot in run) and #32 (5 amp hot at all times) located in the smart junction box (cab fuse panel).

and

#15 (30 amp) and #17 (40 amp) located in the battery junction box (under hood)
 

Last edited by Rev; Nov 30, 2014 at 01:46 PM.
Reply
Old Dec 1, 2014
  #4  
Bob C. of Indiana's Avatar
Joined: Oct 2012
Posts: 310
Likes: 18
From: Central ,Indiana
Try cleaning the multi-function switch on the turn signal lever. It can create several types of problems if the contacts are dirty.Good Luck!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RWeidner13
General Technical & Electrical
6
Feb 21, 2015 01:46 PM
kappesdeb
General Technical & Electrical
0
Jul 17, 2014 11:45 AM
RangerXLT18
General Technical & Electrical
5
Sep 8, 2010 03:15 PM
RangerXLT18
General Technical & Electrical
6
Apr 8, 2010 07:11 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 07:12 AM.