No Heat!
Thread Starter
|
Member
Joined: Jan 2014
Posts: 2
Likes: 0
From: tyler,texas
No Heat!
My 06 Ranger is COLD inside! I think the shaft on the blender door may be broken.there was never never any noise like something broke just one day no more heat. Eng. temp is normal. Anybody know a quick fix without pulling the interior apart? This lil truck is not allowed any down time...
Member
Joined: Apr 2010
Posts: 645
Likes: 2
From: Knoxville, TN
More likely the actual actuator than the shaft. Ford improved the design in late late 90s.
I would unbolt the actuator (8mm bolts) and turn the temp **** and check for movement.
If it doesn't move then thats most likely your issue.
I would unbolt the actuator (8mm bolts) and turn the temp **** and check for movement.
If it doesn't move then thats most likely your issue.
Thread
Thread Starter
Forum
Replies
Last Post
nanookc
General Technical & Electrical
4
Feb 17, 2015 01:18 PM
