No power to fuel pump relay
Thread Starter
|
Member
Joined: Jan 2019
Posts: 9
Likes: 0
From: TX
No power to fuel pump relay
fuel pump not getting power to the fuse box.
Fuel pump turns on and gets power when fuse box is jumped from power from the AC fuse. Relay switch from fuel pump works as I’ve tested it in the ac position and it works.
So just no power to the relay in the fuse box. How to get get power back to the fuse box so I can stop sharing/ jumping the power from the AC fuse
wow, sry, completely forgot:
1994 Ranger 2.3L engine
Fuel pump turns on and gets power when fuse box is jumped from power from the AC fuse. Relay switch from fuel pump works as I’ve tested it in the ac position and it works.
So just no power to the relay in the fuse box. How to get get power back to the fuse box so I can stop sharing/ jumping the power from the AC fuse
wow, sry, completely forgot:
1994 Ranger 2.3L engine
Last edited by nksimons06; Jan 31, 2019 at 10:57 AM.
Welcome to the forum
Ford made these Rangers from 1983 to 2012, and the wiring changed over the years
So what YEAR Ranger and what engine?
All years will have a separate Fuel Pump Fuse or Fusible link, which and where depends on year and engine
And that fuse/fusible link is connected directly to the Battery Positive and to one slot in the fuel pump relay's base, so that slot should show 12v all the time, not key on/off related
So key OFF you should still have 1 slot in relay's base with 12volts, if not then fuse or fusible link is bad
Ford made these Rangers from 1983 to 2012, and the wiring changed over the years
So what YEAR Ranger and what engine?
All years will have a separate Fuel Pump Fuse or Fusible link, which and where depends on year and engine
And that fuse/fusible link is connected directly to the Battery Positive and to one slot in the fuel pump relay's base, so that slot should show 12v all the time, not key on/off related
So key OFF you should still have 1 slot in relay's base with 12volts, if not then fuse or fusible link is bad
Thread
Thread Starter
Forum
Replies
Last Post
Chriseparent
General Technical & Electrical
27
Oct 9, 2023 06:39 PM
