Removal of driver side spray nozzle-1999 Mazda B2500, 2.5L
#1
Removal of driver side spray nozzle-1999 Mazda B2500, 2.5L
I have a very weak washer spray, gurgling really, from driver side on my windshield. Passenger side is pretty strong though. I have already checked washer hoses and appear to be okay. My intention is to remove and clean out, or replace with a new part, the spray nozzle on driver side.
How do I go about safely removing the spray nozzle? In my model year, the nozzle is located on a metal cowling (and not on the hood). When I pop the hood, I can see a thick Black grommet type of hose that connects to the bottom of the spray nozzle but is behind the wiper motor. I looks like quite a challenge with very tight space.
Any ideas or suggestions are very much appreciated.
Spray nozzle on metal cowling.
Engine bay.
Washer hose located behind wiper motor, thick hose connected to underside of metal cowling.
How do I go about safely removing the spray nozzle? In my model year, the nozzle is located on a metal cowling (and not on the hood). When I pop the hood, I can see a thick Black grommet type of hose that connects to the bottom of the spray nozzle but is behind the wiper motor. I looks like quite a challenge with very tight space.
Any ideas or suggestions are very much appreciated.
Spray nozzle on metal cowling.
Engine bay.
Washer hose located behind wiper motor, thick hose connected to underside of metal cowling.
Thread
Thread Starter
Forum
Replies
Last Post
NewShockerGuy
General Technical & Electrical
6
05-28-2023 01:12 PM
Javman
General Ford Ranger Discussion
3
04-06-2023 10:12 AM