unknown Dinging , from under dash
#1
unknown Dinging , from under dash
Well this week I started painting my interior , I took out the airbag , gauge cluster and headlight switch , and radio bezel .
Now everything is back together , when I start my truck and shift into drive ,
I get a chime from under dash - Its five slow tones , then repeats 4 times then quits , its coming from a black box behind radio bezel infact theres two back there , its the one on drivers side .
Before I took everything out my airbag flashed a 2-7 code bad light
Now its flashing a differant code any ideas?
If you need anymore info let me know
-nick
Now everything is back together , when I start my truck and shift into drive ,
I get a chime from under dash - Its five slow tones , then repeats 4 times then quits , its coming from a black box behind radio bezel infact theres two back there , its the one on drivers side .
Before I took everything out my airbag flashed a 2-7 code bad light
Now its flashing a differant code any ideas?
If you need anymore info let me know
-nick
#4
The 27 and the 25 airbag codes are related to the Passenger Air Bag Deactivation (PAD) Switch. Most often, the problem is the lamp.
See: https://www.ranger-forums.com/forum2...ad.php?t=27436
See: https://www.ranger-forums.com/forum2...ad.php?t=27436
#6
Well I temp fixed it , A couple weeks ago I took the switch off when I built my center console . So this after noon I rehooked it back up , and the 2-5 code dissapeared I reset the truck and my 2-7 code came back (no biggie I can get a new bulb and soldier back on). I think the reason it all started was when I took my gauge out I disconected the air bag warning light and then everything went haywire .
But thanks for the help
But thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
Chuckjonz
General Technical & Electrical
8
01-20-2012 10:38 PM