alrighty, so im havin some issues with my vents... basicly i have all functions on the heat and fan speed... also my ac works in both positions. my vent selction does not, every thing comes out the defrost. i tore through as much dash as i could(center section) to get to the vaccum lines and the switch itself. all seemed to be intact. fuses seemed ok as well

not sure if anyone has ran into this. but hey shoot some ideas

oh its on a 02xlt with a 4.0 ex cab

thanks

 

Vacuum lines under the hood and vacuum ball.

 

a grey one and a black one? passenger side? ball attached to inner fender?

 

the black one it should have two lines going into it

 

pics by chance?

 

bump

need some help... this ball were is it located, how many lines in? what kind of connectors to look for?

 

should be bolted inside the engine bay on the passenger fenderwell, looks like a big black rubber ball

 

On my '01 4.0 4x4, it is screwed onto the passenger side inner fender.

 

haha... yeah about thoose inner fenders... there a lil bit gone...with the ball. ah poop.

ok well i know how to fix. sweet

 

ok, i got a new ball. its obvious were there black vac line goes, but were does the grey line run to... pics would help alot too...

thanks guys

 

 

my friend had this problem and it was just a solenoid. 200 bucks though haha

 

its deffinetly not a solenoid.

any body????

 

One line from the engine to the ball, the other runs into the heater selector.

You can see the line running into the truck in this pic. Second is the ball/football on my truck.

The grey line runs up to the heater bypass.

 

any shots of the grey vac line... i got the black one dialed but the grey is my steak to the heart now...

 

The grey is in the pic.

It goes to the heater bypass.

 

Both mine are the same color hoses I do believe. I was messing alot with them the past week or so. One end goes into the heater crap. The other end loops around the back of the intake and into a central vacuum 'cluster' on the driverside of the intake manifold.

Why are you missing inner fenders?

 

inner fenders are gone because i am eventually gonna be slightly longer travel... will require fibers and such and the started to sag after a day out rallyin so...bye bye to the inners