Interior Semi-Tech General discussion of interior for the Ford Ranger.

07 Ranger seats 60/40

Old Jun 24, 2012
  #1  
rangersport07's Avatar
Thread Starter
|
Member
iTrader: (1)
Joined: Nov 2011
Posts: 112
Likes: 0
From: Copper Cliff, Ontario
07 Ranger seats 60/40

hey guys, not sure if this is the right place for this post, but just wondering if anyone might know what my set of seats are worth ? they are 60/40, black and grey from an 07 supercab sport. manual and tracks still attached, in mint condition.

I picked up a set of leather sporttrac seats so looking to get rid of these, but have no idea what they are worth.

also what are 07 stock tails going for? i'm gonna be getting rid of them here soon too.

I'm in Ontario Canada too if that matters.
 

Last edited by rangersport07; Jun 24, 2012 at 01:00 PM. Reason: more info
Reply
Old Jun 24, 2012
  #2  
98liftedranger's Avatar
RF Veteran
iTrader: (5)
Joined: Aug 2008
Posts: 12,538
Likes: 4
From: California
Probably $100 or $150.
 
Reply
Old Jul 7, 2012
  #3  
B737's Avatar
Member
Joined: Jun 2011
Posts: 297
Likes: 0
From: Brick, NJ
pictures of your new seats please! :)
 
Reply
Old Jul 7, 2012
  #4  
Scrambler82's Avatar
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
I sold a set of 60/40s from my 03 EDGE with 30K miles on them, nice seats, for $100.00.

The guy jumped all over them, maybe I should have asked more.

Depending on the condition and need, the price can vary a lot.

Just my opinion.
 
Reply
Old Jul 7, 2012
  #5  
B737's Avatar
Member
Joined: Jun 2011
Posts: 297
Likes: 0
From: Brick, NJ
Are the sporttrac seats bolt in? I have an 07' as well...
 
Reply
Old Jul 7, 2012
  #6  
rangersport07's Avatar
Thread Starter
|
Member
iTrader: (1)
Joined: Nov 2011
Posts: 112
Likes: 0
From: Copper Cliff, Ontario
Sport Trac seats are 99% bolt in, all you have to do is enlarge / elongate 3 of the holes so they line up with the ranger floor holes and so the ranger bolts will fit through the rear ST seat holes. very easy to do.

Now air bag sensors and seat bealt tentioner wiring in the ranger are a interesting story..... ranger passenger seat has a pressure sensor in it, it's a liquid filled pad between the seat frame and the foam, I believe it could be removed and transfered to the ST seats with a little effort.

Drivers seat in the ranger has a seat position sensor.... haven't really looked at it too closely yet, but once again, with a little fab work, I believe it could be transfered also.

seat belt tentioners in ranger are long cylinder like things attached directly to the female buckle, I have just bolted the ranger buckles to the ST seats for now, no wiring hooked up, so as of right now, my air bags are disabled. if you get ST seats, be sure to get the seat belt track, you can just leave it attached and just use the ST female buckle with existing Ranger male buckle, they fit and latch. I made the mistake of only grabbing one, forgot the other one in the ST bed....
 
Reply
Old Jul 7, 2012
  #7  
rangersport07's Avatar
Thread Starter
|
Member
iTrader: (1)
Joined: Nov 2011
Posts: 112
Likes: 0
From: Copper Cliff, Ontario
oh yeah, one other thing, anyone doing this with a 07+ I highly recomend popping the gage cluster out and pop the little round black pizzo buzzer (seat belt and door chime) off the pcb board. cause with the air bags unhooked, it will chime when you start it, and every 25 mins of driving... each time is 5 dings reapeated 5 times.... needless to say... 2 hour drive to work drove me insane........
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jordanvw
OLD - Interior, Exterior, Electrical, & Misc.
0
Mar 13, 2011 12:17 PM
drppdyllwrngr
OLD - Interior, Exterior, Electrical, & Misc.
30
Mar 16, 2010 07:38 PM
Njc0013
Interior Semi-Tech
0
Feb 3, 2010 11:29 AM
SONICEDGE03
Interior Semi-Tech
24
Feb 14, 2005 09:22 AM
03OxfordEdge
Interior Semi-Tech
30
Jan 24, 2005 05:55 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 10:25 PM.