Gauge Swap
Gauge Swap
On one of my trips to the J-yard I found that an 03 2door had some sweet gauge overlays so i took em out. and they are much cooler than the lame black and white ones i think. i like the silverish color and orange needles. Also the text that is used is alot better and matches my aftermarket gauges better. I also shaved the backs and did the blue LED mod as well.
i didnt even know any rangers came with these? or are they aftermarket?


i didnt even know any rangers came with these? or are they aftermarket?


all i did was swap the faces. so i just peeled them off the 03 in the j-yard and pulled off my old ones and put the silver ones in their place.
yeah i had seen them once before, and this time i decided to take them since they looked sweet, but were still stock
yeah i had seen them once before, and this time i decided to take them since they looked sweet, but were still stock
Originally Posted by INT3RC3PTOR
i didnt even know any rangers came with these? or are they aftermarket?
Originally Posted by rwenzing
Those are factory XLT gauges, 2003 only. I have the same ones in my avatar but the flash makes them look white.
that's weird that they only made them for 03! they're really sharp gauges...i'd trade my white ones off for some of those gray ones
Originally Posted by lifted97ranger
how hard are they to get off the cluster?
they're not bad at all...you just need to have them at room temperature (65-85*), pull the needles off and ease the overlays up from the gauge assy.
Originally Posted by lifted97ranger
i wonder if those would fit my '97? or if i could just swap in a complete cluster.....hmmmm
that's what i did when i got my sportrac gauges...just gutted mine and installed it in the sportrac casing
Originally Posted by Sad_Savant
that's what i did when i got my sportrac gauges...just gutted mine and installed it in the sportrac casing
you only need to pull the speedometer and swap that.
there is a how-to on RPS that tells you how to recalibrate the speedo needle.
i swapped my speedo/odo over to a Explorer Sport cluster, everything works great but the theft light because pre 2001 the theft light worked different.
there is a how-to on RPS that tells you how to recalibrate the speedo needle.
i swapped my speedo/odo over to a Explorer Sport cluster, everything works great but the theft light because pre 2001 the theft light worked different.
Originally Posted by lifted97ranger
so you just took the faces off and put them on yours? or did you install the complete Sport Trac gauge cluster?
i did what beard was describing...it just seemed easier than doing it the other way...very simple...
and i didn't know that there was a how-to on it!
Originally Posted by Cape Fear
I never realized those were for 03 only.
Originally Posted by Lord Of War
Is it hard to take the dash apart to install new guage or guage covers?
drop a few peices down and there be the bolts..once its out of the truck your smooth ridin from there..
^ pm sent
nah i didnt have them done for the meet i just did it a couple nights ago. i really like them.
I made my proccess of taking the dash apart easier with a little modding here and there. alot faster to do now
nah i didnt have them done for the meet i just did it a couple nights ago. i really like them.
I made my proccess of taking the dash apart easier with a little modding here and there. alot faster to do now





