Overhead Console
Thread Starter
|
Member
Joined: Apr 2005
Posts: 27
Likes: 0
From: Dickinson, ND
Overhead Console
Does anybody know the Ford part # for the temperature sensor that is needed for and overhead console out of a '97 explorer. The Ford dealership said they have two sensors; one is about $20 while the other is $100. Which one do i need? Thanks
F87Z-12A647-AA sensor
You will also need the connector pigtail - about $30+ from the dealer.
That's why it's preferable to get the whole thing from a junkyard for $5~10. Many Explorers have more than one. You'll know you have the right one when you find color codes dark blue/yellow and dark blue/white.
You will also need the connector pigtail - about $30+ from the dealer.
That's why it's preferable to get the whole thing from a junkyard for $5~10. Many Explorers have more than one. You'll know you have the right one when you find color codes dark blue/yellow and dark blue/white.
Thread Starter
|
Member
Joined: Apr 2005
Posts: 27
Likes: 0
From: Dickinson, ND
The connector pigtail that i need, is that to connect to the sensor or to the actual console? Because i have the console already and it has the connector attached to the console with about 6 inches of wire after the connector. I thought that all i would have to do is wire the actual wires to the sensor.
Thread
Thread Starter
Forum
Replies
Last Post
ranger4.0
OLD - Interior, Exterior, Electrical, & Misc.
10
Feb 15, 2011 11:25 PM
TheBearJeweler
OLD - Interior, Exterior, Electrical, & Misc.
19
Jun 12, 2009 07:26 PM
