It is in good condition, there are a few scratches on the front and the top, but it still works great.

Here are the specs, and some pictures.

I would like to get $350.00 for it. Paid $675.00 for it almost a year ago.

Number of Channels--2
Rated Power-
continuous power 75W x 2 @ 4-Ohms RMS
150W x 2 @ 2-Ohms RMS
250W x 2 @ 1-Ohms RMS
300W x 1 @ 4-Ohms bridged RMS
500W x 1 @ 2-Ohms bridged RMS
Total Power total sum of 'rated power'-500 Watts
Bridgeable- Yes
Crossover Controls- High-Pass (HP): 40-400Hz 12db or 24db/Octave Linkwitz-Riley
Low-Pass (LP): 40-400Hz 12db or 24db/Octave Linkwitz-Riley
Infrasonic filer: 27Hz 12db/Octave
Tone Controls-- Bass: 0dB to +18dB @ 35-70Hz
Signal Input-- Low level: 1 RCA pair
Signal Output-- Low level: 1 RCA pair
Preamp Output Crossover: HP/AP/LP 12db/Octave Butterworth
Power Input Connector- Block
Power Wire Gauge-- 1/0 AWG
Speaker Output Connector-- Screw terminal barrier strip
Speaker Wire Gauge-- 8 AWG to 18 AWG
Heat Sink Type-- Cast aluminum
Cooling-- Fan Cooled
Remote Controls-- ParaPunch Bass EQ (included with cable)
Visual Indicators- Power On, Thermal Status, Speaker Protection
Circuit Topology Class- Class A/B
Frequency Response- 20Hz to 20kHz +/- 0.5 dB