Anyone know what all is involved in doing a door swap on a 99 ranger quadcab...doors I wanna swap has power windows and locks...current doors are manual. I wanna hook up power doors.

 

Depends on how involved you want to get, lol

The power windows are pretty easy
You need a fused 12volt source thru a key on relay, one wire from relay to each door, so 2 wires
Then 2 wires from drivers door to passenger door, so master switch can roll up/down passenger side window

Door locks can be alot more involved, unless you just want each door switch to lock or unlock that one door, then its just supplying 12v to each door, usually full time 12v not key on 12v

If you are looking to add keyless entry, Fobs, then it gets way more complicated

Also better to buy an after market keyless entry kit

Ranger keyless entry diagram below, 2000 is same as 1999