Hey every one. I ran across a good deal on a 99 extended cab 4x4 ranger. Its a 5 speed and the body is in good condition with good tires. However the engine does have a slight rod knock and will need to be rebuilt. I have talked to a few machine shops in town and it looks like about $1300 for the rebuild. I would drop a fresh clutch in it while I have it apart.

My question is what else should I look into. I was thinking about .040 or .060 over pistons and maybe a small cam with a little trimming on the head. Not trying to brake the bank but while I have it apart I figured I might as well look into some budget upgrades.

Also considering swapping out the exhaust manifold to a 94 tube set up or trying to find a aftermarket header and finishing it up with a 2 1/2 inch catless exhaust since I don't have to worry about smog.

 

You should look into a different engine instead of putting that much work into that one. If you want to "upgrade" the block, why not buy something bigger? You can get a rebuilt 5.0 for $1300.

 

99?
2.5?
4x4?

Um....last I read after 97 there were no 4cyl 4x4's.

Just wanna make sure I've got the right info on your truck before I give suggestions.