SOHC - 2.3L & 2.5L Lima Engines Discussions and Topics specific to the Lima 4 cylinder engines

Rough start on 2.5L

Thread Tools
 
Search this Thread
 
Old Mar 30, 2012
  #1  
robert99ranger's Avatar
Thread Starter
|
RF Veteran
iTrader: (4)
Joined: Aug 2007
Posts: 5,809
Likes: 4
From: Indiana/Mississippi
Rough start on 2.5L

Every once and a while when I try to start my truck, it will turn of then sounds like it wants to start but kinda clunks then quits. I try to start it again and does the same thing. Third time it fires right up. Have never had a problem starting but will sometimes do this to me. It has happened in the past but has occurred more often within the last month. Any ideas? The truck has almost 170,000 miles on the 2.5L. Plugs are about 20,000 miles old. Never have had any mechanical work done to the engine. Didn't know if it was injectors maybe or what?
 
Reply
Old Mar 30, 2012
  #2  
tempfixit's Avatar
Member
Joined: Feb 2012
Posts: 93
Likes: 0
From: Windsor, WI
Have you checked the fuel pressure, kinda sounds like a leaking check valve in the pump and it takes that long to prime the fuel system. Next time maybe try some carb cleaner in the throttle body after 1st attempt and see what happens.
 
Reply
Old Mar 30, 2012
  #3  
robert99ranger's Avatar
Thread Starter
|
RF Veteran
iTrader: (4)
Joined: Aug 2007
Posts: 5,809
Likes: 4
From: Indiana/Mississippi
I'll have to check. I have the kit to do it. Do I check when its turning over? With just the ignition on? With it running?

Also, why kind of psi am I shooting for?
 
Reply
Old Mar 30, 2012
  #4  
tempfixit's Avatar
Member
Joined: Feb 2012
Posts: 93
Likes: 0
From: Windsor, WI
35-45 psi koeo, watch to see if pressure decreases with key off.

Go to www.autozone.com and register for the repair Guides, it is free.

hope this helps

PS I tryed copying and paste but did not work
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ChargerOnDavins
2.9L & 3.0L V6 Tech
4
Oct 12, 2023 03:37 PM
Mike_92
Drivetrain Tech
0
Oct 28, 2013 09:26 PM
bonecrusher
SOHC - 2.3L & 2.5L Lima Engines
3
Mar 19, 2011 04:04 AM
BOxford32
2.9L & 3.0L V6 Tech
2
Feb 23, 2008 06:29 PM
Denny Skones
4.0L OHV & SOHC V6 Tech
13
Mar 9, 2006 10:01 AM




All times are GMT -6. The time now is 05:52 PM.