|
Kk gotcha. Logan mentioned on one of the other forums that the part number was supposed to be 213-01-238-A, which is 4.488 in long, 3.75 in center to eye. So that's what we should be looking for. That's the longest available on poly.
|
Originally Posted by bfd's_ranger
(Post 1943034)
Kk gotcha. Logan mentioned on one of the other forums that the part number was supposed to be 213-01-238-A, which is 4.488 in long, 3.75 in center to eye. So that's what we should be looking for. That's the longest available on poly.
__________________________________________________ ______________________________________________ wow, that part number is the one for the extended eyelet with that size. all that was wrong were the part numbers... well shit, my bad |
Originally Posted by MaxValle
(Post 1942966)
the part number of the long rod end that was confirmed through logan03CO is 213-01-138-A. they no longer make that part. im just wondering which length of extended eyelet i need to order that would be equivalent in size to that long rod end.
Originally Posted by bfd's_ranger
(Post 1943034)
Kk gotcha. Logan mentioned on one of the other forums that the part number was supposed to be 213-01-238-A, which is 4.488 in long, 3.75 in center to eye. So that's what we should be looking for. That's the longest available on poly.
Originally Posted by MaxValle
(Post 1943047)
beauty man, fox offers that size. might as well get them from fox if im getting fox shocks lol
wow, that part number is the one for the extended eyelet with that size. all that was wrong were the part numbers... well shit, my bad FYI...that length of extended eyelet/long rod end will work for either a stock height or a Superlifted truck. EDIT: I guess I can't go back that far in time and edit anything....See, it will pay for people in the future to read ALL the way to the end of threads! lol :tongue: |
Got mine in the mail today also. Now I just need some coilovers... :biggrin:
|
Got mine in today too, super fast shipping! Probably installing Saturday :)
What length limit straps have people been using? |
Originally Posted by vansnxtweek
(Post 1941890)
I may very well jump on the next order. Trucks installed already look great! Hopefully some guys can post some pictures of the actual coil over setup and the side shot of nooooooooo T-bars :).
Originally Posted by 99offroadrngr
(Post 1942813)
I'm goin to try and get in on the next set but I doubt I'll have my tax returns by the deadline
Originally Posted by DSFD506
(Post 1943025)
Ditto
Originally Posted by morris
(Post 1941922)
Question. Are these exclusive to this site or have you advertised on other sites?
Have you thought about going larger scale with this item? Anyone have any feedback on them? Quality, etc.? I know there's no way a set has been installed yet, but I'm looking for whatever impression you have of them after having them in hand. |
Feedback
The quality seems excellent. I won't be able to install them until I get some coil-overs, but that will be soon... ($$$ tax return) I'll take a few pics of what arrived on Monday, (sent on Saturday!) when I get home from work tonight. The powdercoating looked great, the pieces were wrapped in some foam stuff and then brown paper and then packed together in a flat rate box with newspaper. Thanks for including some gussets also, I didn't think they would come with the kit. :biggrin:
|
Quality is A++ so far, when I get them installed I will be back and give my full opinion .
|
got mine yesterday, look great !! cant wait to get them installed
|
Good deal. I believe everyone should have theirs by now.
Anyone install yet? Post pics if you have! |
Haven't got mine yet, but I'm not surprised considering it usually takes forever to ship anything up to canuckle land.
|
Lol well that's ironic, they showed up today! Pretty stoked to get them on, they look great!
|
Good deal!
Updates to second run: ETA on the batch being complete is end of the month. Stock is in, pieces being cut, and they should be to the welder by next weekend. 5 spots still open on this run! |
I want some, I can just install them on my pretty much stock truck with spindle?
|
Man I want these so bad but I just can't figure out exactly how to know which coil overs I need. I have searched through this thread a few times and I see the part numbers people post and stuff but I don't know how to be sure what I need. Not asking for someone to take a ton of time to tell me but can someone just guide me? I have been going on the Fox website and I see 2.0 2.5 for sizes..I know I need extended eyelets and things. Just need to know what I have to get. I do know that I need the 12" springs and as far as the spring rate I guess I'd go 700-750 being I have no grill guard or winch or anything.
Do you need any type of deposit or a full payment or what? I have been wanting to do this forever. Thanks everyone for the help. I know I am always asking questions. |
Originally Posted by vansnxtweek
(Post 1948952)
I have searched through this thread a few times and I see the part numbers people post and stuff but I don't know how to be sure what I need. Not asking for someone to take a ton of time to tell me but can someone just guide me? I have been going on the Fox website and I see 2.0 2.5 for sizes..I know I need extended eyelets and things. Just need to know what I have to get.
I think you even told us you were Superlifted...which is the exact items I posted here: https://www.ranger-forums.com/showpo...&postcount=190 If you want to use Fox items...the part numbers are all listed (note my one typo talked about in the last page - I can't edit a post that old). The valving and everything has also been mentioned. I guess I'm not sure what more you’re looking for? |
A deposit or payment in full will secure a spot. PM me for details.
As for shocks, you want 2.0, not 2.5. There is no need for the larger, and it's a tight enough fit on our truck with 2.5" springs, nevermind 3" ones. Your best bet is to read through this thread and "coilover sadness/madness" as most, if not all, of your questions have been answered. |
Originally Posted by Prerunner-Ranger
(Post 1948706)
I want some, I can just install them on my pretty much stock truck with spindle?
|
I guess I really need to do some more studying on the sadness/madness thread. I'm just not very familiar with coil overs themselves. I go on the Fox website and I see quite a few different choices for different shock bodies including race shocks and "Ford" specific shocks.
Ean, I'm sorry I missed your part numbers. I know how annoying it is when the same questions get asked repeatedly by late bloomers in a thread. "What's the best muffler to get???" ;) Buy anyways..I found the part numbers for the extended eyelets. I'm going to do some more looking to find just what coil overs I need and which springs I need. I know the length and general idea of the spring rate. Thanks everyone for the help. |
Originally Posted by logan03CO
(Post 1905629)
I thought I posted most of this information in this thread: https://www.ranger-forums.com/showth...adness+madness
Superlifted Truck (Confirmed via PM this setup works 100%): Ohhhhhh wow I'm blind. :crazy: Da da da daaaaaaaaaaaa! Thanks everyone....life is good haha. |
Originally Posted by vansnxtweek
(Post 1949044)
Ean, I'm sorry I missed your part numbers. I know how annoying it is when the same questions get asked repeatedly by late bloomers in a thread. "What's the best muffler to get???" ;)
Originally Posted by vansnxtweek
(Post 1949050)
Ohhhhhh wow I'm blind. :crazy:
|
Alright so I found all the parts I think. Most all from ORW...the spacers from Poly Performance. Having trouble finding where to get the eyelets.
Where do I sign for these brackets? :] |
Originally Posted by vansnxtweek
(Post 1949459)
Most all from ORW...
My previous comments on valving and what a GOOD dealer should do for you: Any "real" dealers will give you tons of advice as well (and BETTER advice). I wouldn't buy my Fox brand coilovers from an online "shopping cart" without having them customized. More of my post here:https://www.ranger-forums.com/showpo...&postcount=285
Originally Posted by vansnxtweek
(Post 1949459)
...the spacers from Poly Performance.
Originally Posted by vansnxtweek
(Post 1949459)
Having trouble finding where to get the eyelets.
|
I don't see a price posted (read last few pages plus first post) but give me some details/prices. I'll be in for a set because I wanna store these things til I have a garage and coil overs to install. ---- torsion bars.
*edit* pm me price if ya want, cause I check R-F a lot less often now |
Originally Posted by logan03CO
(Post 1949469)
I assume they are going to custom valve the coilovers for you? I've heard decent things from them..but I wasn't impressed when I called them a few years ago.
My previous comments on valving and what a GOOD dealer should do for you: Any "real" dealers will give you tons of advice as well (and BETTER advice). I wouldn't buy my Fox brand coilovers from an online "shopping cart" without having them customized. More of my post here:https://www.ranger-forums.com/showpo...&postcount=285 Careful on the spacers...you will want to verify these new brackets have the same 1.5" inner dimension as the RCD ones did before you pull the trigger. I think ME00Stepside said they do, and he might even be able to supply these side-to-side spacers instead of having to buy them from Poly...but I'm sure he will answer. The Fox brand ones are also sold on Polyperformance. Click here:http://www.polyperformance.com/shop/...let-p-865.html ALL very important info! Thank you so much brotha. I did read where he was providing some spacers with his kit but I wasn't sure if it was these spacers or not. I will def. do some calling and conversating with a company before I buy coil overs "off the shelf." Great great info man. |
| All times are GMT -6. The time now is 01:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands