will this lift kit fit my 03 xlt

http://www.performancecenter.com/pro...?brandname=RCD

 

I would say yes. You have the same suspension setup as my 98 and thats what that one worked with.

 

yes if you have the larger rotors you just have to get the bracks or something search its been discussed before..it is also not a bolt on kit it requires professional welding done to i think 1-2 pieces

 

I wouldn't go so far as to say it needs strictly professional attention for welds, just competent welding with a decent MIG from someone with a fair amount of skill(no coat hangers and acetylene folks).

 

iv had the kit for a year and a half.. never welded the brackets on.. in fact gumby now has them at his house since he is buying the kit off of me in march

 

yea welding is not a problem my dad has been welding almost everyday since the late 1970's so he know's what he is doing. he is also a fabricator.
do you have to have the smaller rotors or can i just use a larger rim?

 

its where the new knuckle mounts the caliper. take you wheel off and measure the rotor diameter if its 12" just buy a rotor for a 02 4x4 and put it all together.. and your done. i had to do this on my 04 as i had the 12" stock

 

what size are the 02 rotors?

 

11.28"

 

ok thanks ill measure this weekend.

if mine are to big these should work right?
http://www.stuffforyourranger.com/st...ccc54b11eebf26

http://www.stuffforyourranger.com/st...ccc54b11eebf26