A-Frames?
A-Frames?
99 4.0 4x4
I had my wheels off the other day replacing the brakes, and i remembered that my upper A-Frames are different, ill get some pictures.. but until then if anyone can visualize this, or w/e that would be great..
On my truck, the upper a-frame (propper name) where the Upper Ball joint is behind the wheels, has a different design on the driver side then on the passenger side...
as i said ill get pics 2nite, but does anyone know if this is supposed to be like this? it drives fine....
I had my wheels off the other day replacing the brakes, and i remembered that my upper A-Frames are different, ill get some pictures.. but until then if anyone can visualize this, or w/e that would be great..
On my truck, the upper a-frame (propper name) where the Upper Ball joint is behind the wheels, has a different design on the driver side then on the passenger side...
as i said ill get pics 2nite, but does anyone know if this is supposed to be like this? it drives fine....
ford made them different in different years.
btw Upper Control Arm.
btw Upper Control Arm.
Originally Posted by rwenzing
FWIW, I just did a Google search on the part numbers and this appears to be the situation. Note that these numbers are for with Rangers with torsion bar suspension ONLY (98+ 4x4, 2000 Trailhead, 2001+ Edge).
DS one-piece UCA 98~2006:
(MOOG K8708T):
UCA w/replaceable/greasable ball joint
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS one-piece UCA 2003 1/2~2006:
(MOOG K80068)
UCA w/replaceable/greasable ball joint
Similar appearance to K8708T above but with slightly different ball joint offset.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS 2-piece style ball joint carrier only 98~2003 1/2
(MOOG K8710T) :
Carrier w/replaceable/greasable ball joint
Note: this part is discontinued and may not be available. The entire 2-piece PS UCA assembly can be replaced by the 1-piece K80068.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lower ball joint only 98+
Greasable, fits DS and PS
(MOOG K8695T)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Outer tie rod ends
Greasable, fits DS and PS
(MOOG ES3461)
DS one-piece UCA 98~2006:
(MOOG K8708T):
UCA w/replaceable/greasable ball joint
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS one-piece UCA 2003 1/2~2006:
(MOOG K80068)
UCA w/replaceable/greasable ball joint
Similar appearance to K8708T above but with slightly different ball joint offset.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PS 2-piece style ball joint carrier only 98~2003 1/2
(MOOG K8710T) :
Carrier w/replaceable/greasable ball joint
Note: this part is discontinued and may not be available. The entire 2-piece PS UCA assembly can be replaced by the 1-piece K80068.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lower ball joint only 98+
Greasable, fits DS and PS
(MOOG K8695T)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Outer tie rod ends
Greasable, fits DS and PS
(MOOG ES3461)
Originally Posted by 99ranger4x4
it doesnt make since that ford would make different upper contol arms on both sides.. its weird haha
Thread
Thread Starter
Forum
Replies
Last Post
Scrambler82
OLD - Interior, Exterior, Electrical, & Misc.
10
May 21, 2010 09:56 AM
RAYJAY
General Ford Ranger Discussion
5
Aug 19, 2004 04:32 AM
