new torsion bars
#26
#28
#29
If anyone does get the part numbers for the B bars and/or F's, please post them so we can get that info in the knowledge base.
#30
Member
iTrader: (4)
Join Date: Nov 2007
Location: Robinson, Pa
Posts: 2,047
Likes: 0
Received 0 Likes
on
0 Posts
Well i went and check mine out i came up with this
I tried taking a picture but it was to blurry
VIN: 1FTZR15E91TA84102
Spr. 1R31B
1K
So if i'm right that gives me the number 1 bars right?
I tried taking a picture but it was to blurry
VIN: 1FTZR15E91TA84102
Spr. 1R31B
1K
So if i'm right that gives me the number 1 bars right?
#32
The bar size is computer selected on the assembly line based on equipment. I think you have to supply the VIN of a B bar equipped truck to order the B bars - that's what we ran into trying to get a part numbers for the #1 bars. Apparently, the parts system does not list them in a way that relates the part number directly to the code.
If anyone does get the part numbers for the B bars and/or F's, please post them so we can get that info in the knowledge base.
If anyone does get the part numbers for the B bars and/or F's, please post them so we can get that info in the knowledge base.
#33
#35
^^supposedly...but i'd say no. #1's sag alot less(I havn't noticed any sag, but mine are brand new) than the B bars do. My B bars were maxxed out w/ 85k on it.
I believe #1 bars would resist sag, thus keeping the "lift" you set it at. Might be possible to allowing you to lift it up higher too, but at the expense of your ball joints.
I believe #1 bars would resist sag, thus keeping the "lift" you set it at. Might be possible to allowing you to lift it up higher too, but at the expense of your ball joints.
Last edited by Fx4wannabe01; 06-09-2008 at 07:15 PM.
#36
2001 XLT 4x4 4.0L Supercab.
SPR/SR: BK ("B" front torsion bars)("K" rear leafs)
VIN: 1FTZR15E51PA99088
Gator: When you get part numbers for the "B" bars, can you please post them?
SPR/SR: BK ("B" front torsion bars)("K" rear leafs)
VIN: 1FTZR15E51PA99088
Gator: When you get part numbers for the "B" bars, can you please post them?
#37