WMS to WMS measurement for 98+ IFS
#1
WMS to WMS measurement for 98+ IFS
Does anyone have a measurement of the wheel mount surface to wheel mount surface of a 98+ front end? I am considering using a frame clip that I have on my 88 but need to narrow it to fit and need measurements to see if it is reasonable to do so. I just measured my 88 and it is 57" wms to wms at full droop. I am aiming for 55" wms to wms. Thanks in advance to anyone who can help.
#2
RF Veteran
iTrader: (1)
Welcome to the forum
Have a look here: https://therangerstation.com/tech_li...ex-axles.shtml
Then in the dana 28/35 and dana SLA for the measurements
1983-1992 had the narrower width axles, 1993-2011(wider body style) was the wider width, but just an inch on each side
Have a look here: https://therangerstation.com/tech_li...ex-axles.shtml
Then in the dana 28/35 and dana SLA for the measurements
1983-1992 had the narrower width axles, 1993-2011(wider body style) was the wider width, but just an inch on each side
#3
Thread
Thread Starter
Forum
Replies
Last Post