Drivetrain Tech General discussion of drivetrain for the Ford Ranger.

My CV is talking to me

Thread Tools
 
Search this Thread
 
  #1  
Old 11-16-2007
camodown's Avatar
Lost in Nowhere
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Midland, TX
Posts: 5,022
Likes: 0
Received 0 Likes on 0 Posts
My CV is talking to me

Ok for the last couple of days I keep hearing this whistling noise and thought is was in the cab. Nope so then I thought it was around my tire, so I figured a rock was stuck in there so I clean around the brakes, nope. Then I figure out it is coming from the passenger tire. So I take the tire off and start cleaning that side.

After I spin the wheel I realize it is where the cv and axle shaft come together. Why would this start squealing? I gave it a little wd40 but it still squeals.

Would it squeal there if my diff fluid is getting low? I was going to change it over the thanksgiving holidays anyways.

Any ideas?
 
  #2  
Old 11-16-2007
jrpro130's Avatar
RF Veteran
iTrader: (1)
Join Date: Sep 2005
Location: Florida
Posts: 5,057
Likes: 0
Received 1 Like on 1 Post
Check your diff fluid. If it's low, fill it up and try to duplicate the noise. If it is ok, then I would take the CV out and inspect the axle and CV.
 
  #3  
Old 11-16-2007
ranger's Avatar
Member
Join Date: Jun 2006
Location: Imperial Beach, CA
Posts: 4,502
Likes: 0
Received 2 Likes on 2 Posts
how many miles are on the cv?
 
  #4  
Old 11-16-2007
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
Likes: 0
Received 3 Likes on 3 Posts
you're blinker fluid may be low, that was my problem

do u mean axle as in the diff? or axle as in the hub?
 
  #5  
Old 11-16-2007
ranger's Avatar
Member
Join Date: Jun 2006
Location: Imperial Beach, CA
Posts: 4,502
Likes: 0
Received 2 Likes on 2 Posts
the flux capisitor is bad.

youll need 1.1 gigwattttts
 
  #6  
Old 11-16-2007
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
Likes: 0
Received 3 Likes on 3 Posts
its 1.21 gigga-watttttsss

ok back on topic haha
 
  #7  
Old 11-16-2007
gumby's Avatar
Member
iTrader: (1)
Join Date: Nov 2005
Location: indy
Posts: 1,581
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by camodown
After I spin the wheel I realize it is where the cv and axle shaft come together.
more specific? the boot itself is squealing? ive seen the boots make noise before. low speed, nuthin to worry about.

or sumthin else?
 
  #8  
Old 11-16-2007
camodown's Avatar
Lost in Nowhere
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Midland, TX
Posts: 5,022
Likes: 0
Received 0 Likes on 0 Posts
it is not actually the boot. You have your axle shaft that goes down the passenger side that is stationary then the cv that starts spinning. Right where it starts spinning is where the noise comes from.

I'm leaving for houston now so I'll take pictures if you don't get what I'm saying sunday.
 
  #9  
Old 11-16-2007
gumby's Avatar
Member
iTrader: (1)
Join Date: Nov 2005
Location: indy
Posts: 1,581
Likes: 0
Received 0 Likes on 0 Posts
gotcha.

high pitched? loud? sound like its inside the diff, or maybe the seal?
 
  #10  
Old 11-16-2007
jrpro130's Avatar
RF Veteran
iTrader: (1)
Join Date: Sep 2005
Location: Florida
Posts: 5,057
Likes: 0
Received 1 Like on 1 Post
seal
 
  #11  
Old 11-16-2007
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
Likes: 0
Received 3 Likes on 3 Posts
you know what its really saying, "buy matt's RCD kit"
 
  #12  
Old 11-18-2007
camodown's Avatar
Lost in Nowhere
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Midland, TX
Posts: 5,022
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by gumby
gotcha.

high pitched? loud? sound like its inside the diff, or maybe the seal?
yeah it is high pitched like a whistle, and only makes the noise from 0 to about 40. After nothing until I slow down.

So if it is a seal, is it ok if I drive it home (6 hours)?
 

Last edited by camodown; 11-18-2007 at 03:44 PM.
  #13  
Old 11-18-2007
gumby's Avatar
Member
iTrader: (1)
Join Date: Nov 2005
Location: indy
Posts: 1,581
Likes: 0
Received 0 Likes on 0 Posts
sounds like it probly jus a noisy seal. check the fluid, and drive it is about all you can do...if its gonna break, its gonna break.
 
  #14  
Old 11-18-2007
camodown's Avatar
Lost in Nowhere
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Midland, TX
Posts: 5,022
Likes: 0
Received 0 Likes on 0 Posts
Alright, thx

Originally Posted by gumby
.if its gonna break, its gonna break.
I think that motto could be used for just about everything haha
 
  #15  
Old 11-21-2007
camodown's Avatar
Lost in Nowhere
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Midland, TX
Posts: 5,022
Likes: 0
Received 0 Likes on 0 Posts
whoohooo, it stopped today. it made a weird noise then stopped. I thinking something was caught in there or something, I'm not sure but it stopped.
 
  #16  
Old 11-21-2007
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by 99ranger4x4
its 1.21 gigga-watttttsss

ok back on topic haha
Well if we want to get picky......LOL


1.21 gig gig gig gig gig gig gigawatts
 
  #17  
Old 11-27-2007
Alex98's Avatar
Member
Join Date: Jul 2007
Location: Baltimore, Maryland
Posts: 949
Likes: 0
Received 1 Like on 1 Post
my ranger is actually making that noise its really wierd and it seems like it is getting worse the more i drive it, any suggestions?
 
  #18  
Old 11-27-2007
camodown's Avatar
Lost in Nowhere
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Midland, TX
Posts: 5,022
Likes: 0
Received 0 Likes on 0 Posts
change your front diff fluid and see if that helps. I was driving on rough dirt roads and think that knocked out something that was stuck somewhere.
 
  #19  
Old 11-28-2007
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
Likes: 0
Received 3 Likes on 3 Posts
is the shaft still there?
 
  #20  
Old 11-28-2007
Alex98's Avatar
Member
Join Date: Jul 2007
Location: Baltimore, Maryland
Posts: 949
Likes: 0
Received 1 Like on 1 Post
lol, i checked my front axle fluid and it didnt even need to be changed.
 
  #21  
Old 11-28-2007
camodown's Avatar
Lost in Nowhere
Thread Starter
iTrader: (3)
Join Date: Feb 2007
Location: Midland, TX
Posts: 5,022
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 99ranger4x4
is the shaft still there?
yeah

it was a rock or something
 
  #22  
Old 11-28-2007
99ranger4x4's Avatar
RF Veteran
iTrader: (3)
Join Date: Jun 2006
Location: Austin, TX
Posts: 12,198
Likes: 0
Received 3 Likes on 3 Posts
yea rocks suck, i had to replace a rotor and pads because of one
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TrePaul86
Snapshots
61
02-25-2009 08:56 PM
jimalee2ooo
General Ford Ranger Discussion
7
05-05-2008 06:33 AM
rngprerunner
General Technical & Electrical
5
04-10-2008 06:46 AM
ford4life
General Ford Ranger Discussion
21
04-05-2008 04:02 PM



Quick Reply: My CV is talking to me



All times are GMT -6. The time now is 04:04 AM.