Spline Determination issue + Locker
#1
Spline Determination issue + Locker
Through the literature Ive read I have an R6 Axle code, 3.73 L/S 8.8 on my 98 B4000. But can't seem to find any info on splines, especially with the tag on the pumpkin gone. Anyone able to help?
My goal here is to find an open diff for a locker, am I right in saying an axle code of 91-98 Open diff will work? and only an axle code of 96 will work if im using that ring gear due to the 3.73?
Link for reference as to what Im looking at.
Rear Axle Codes / Determine Gear Ratio - Ford Ranger Forum
My goal here is to find an open diff for a locker, am I right in saying an axle code of 91-98 Open diff will work? and only an axle code of 96 will work if im using that ring gear due to the 3.73?
Link for reference as to what Im looking at.
Rear Axle Codes / Determine Gear Ratio - Ford Ranger Forum
#2
#3
#4
#5
locker for LSD carrier info
found the info
Motivegear website.
under EZlink enter 2000 Ranger 4wd 4.0 8.8 x 28 rear, differential parts.
open tab for locker, there are listings for Powertrax 9206882807 for the open carrier, 9206882827 for the LSD carrier.
this way you can leave the gears alone.
Motivegear website.
under EZlink enter 2000 Ranger 4wd 4.0 8.8 x 28 rear, differential parts.
open tab for locker, there are listings for Powertrax 9206882807 for the open carrier, 9206882827 for the LSD carrier.
this way you can leave the gears alone.
Thread
Thread Starter
Forum
Replies
Last Post
99fordranger
Drivetrain Tech
19
04-23-2010 06:29 PM
01xltranger4x4
Drivetrain Tech
25
05-18-2007 12:09 PM