Fix one starting problem then another
#1
Fix one starting problem then another
94 ford ranger 3.0, 2wd. Just fixed my last starting problem now I got another one, the next day. Now when I turn my key it clikcs once and that's it, won't turn over. No battery cables are loose, wires on starter aren't loose, have to pop start it everytime I shut it off.
#2
#3
Make sure the ground wire on the engine block is clean and tight.
I had the same problem, and it turned out to be a badly oxidized battery cable on the negative side.
The battery terminals and lugs were clean, but the factory "crimp" was internally corroded causing too much resistance.
I had the same problem, and it turned out to be a badly oxidized battery cable on the negative side.
The battery terminals and lugs were clean, but the factory "crimp" was internally corroded causing too much resistance.
Thread
Thread Starter
Forum
Replies
Last Post
Miller5880
2.9L & 3.0L V6 Tech
2
07-13-2014 09:01 AM
psvines
General Technical & Electrical
1
01-01-2010 06:15 PM
smokindmax
SOHC - 2.3L & 2.5L Lima Engines
5
09-01-2009 10:33 AM