front brake question
#1
front brake question
does anyone have an exploded diagram of the front brakes from a 99 and from 02. im trying to figure out which parts are interchangable or need changed to go from a 99 to 02
the ford diagram didnt do me any good, shows the same part numbers on rotors when i know they are diffrent
the ford diagram didnt do me any good, shows the same part numbers on rotors when i know they are diffrent
#3
#8
ok, on 4x2 XLTs, in 98-00 its a 10.28" O.D. rotor, and then in 01, they upgraded to a 11.28" O.D. rotor and bigger calipers, the brake pads might be a different part number, but ive had the brake pads of my 01 on my old 99
when you buy an aftermarket spindle lift, it seperates the 98-00 from the 01-06 because of the different rotor size, if you try and put a 98-00 spindle on a 01-05 you will have to downgrade the brakes to a 10.28rotor or else the caliper wont fit over it properly, however if you do the oppisite, you can get away without upgrading to a 11.28 rotor, but you wont have full contact with the rotor and pads
when you buy an aftermarket spindle lift, it seperates the 98-00 from the 01-06 because of the different rotor size, if you try and put a 98-00 spindle on a 01-05 you will have to downgrade the brakes to a 10.28rotor or else the caliper wont fit over it properly, however if you do the oppisite, you can get away without upgrading to a 11.28 rotor, but you wont have full contact with the rotor and pads
Thread
Thread Starter
Forum
Replies
Last Post
age
General Ford Ranger Discussion
7
11-11-2013 05:34 PM
barrman
General Ford Ranger Discussion
15
03-20-2006 10:20 PM