2.3L Compatible Swaps
#1
06 2.3L Compatible Swaps
Hi newbie here, my grandpa recently gave me an 06' Ranger and she's got 291k miles with the original engine. I want to swap it but I'm new to all this. What other 2.3's or other engines would be compatible, looking for mostly plug and play with little to no cutting and welding. If this is a stupid question you can refer to my username and I will delete this post. Also if this post is in the wrong place I will delete and again username
Last edited by TheStupidOne; 09-10-2023 at 07:19 PM.
#2
RF Veteran
iTrader: (1)
Welcome to the forum
2004 thru 2011 2.3l Ranger or Mazda B2300 use the same engine, plug and play
And thats all that will work
If you want to change engine size you will need the new engine and its transmission and the computer and wiring for the new engine, and of course exhaust, and motor mounts
2004 thru 2011 2.3l Ranger or Mazda B2300 use the same engine, plug and play
And thats all that will work
If you want to change engine size you will need the new engine and its transmission and the computer and wiring for the new engine, and of course exhaust, and motor mounts
#3
Welcome to the forum
2004 thru 2011 2.3l Ranger or Mazda B2300 use the same engine, plug and play
And thats all that will work
If you want to change engine size you will need the new engine and its transmission and the computer and wiring for the new engine, and of course exhaust, and motor mounts
2004 thru 2011 2.3l Ranger or Mazda B2300 use the same engine, plug and play
And thats all that will work
If you want to change engine size you will need the new engine and its transmission and the computer and wiring for the new engine, and of course exhaust, and motor mounts
#4
Welcome to the forum
2004 thru 2011 2.3l Ranger or Mazda B2300 use the same engine, plug and play
And thats all that will work
If you want to change engine size you will need the new engine and its transmission and the computer and wiring for the new engine, and of course exhaust, and motor mounts
2004 thru 2011 2.3l Ranger or Mazda B2300 use the same engine, plug and play
And thats all that will work
If you want to change engine size you will need the new engine and its transmission and the computer and wiring for the new engine, and of course exhaust, and motor mounts
Would a 2.3 mustang ecoboost fit? I understand that would require more work I'm just wondering how much and if it would be worth it?
#5
RF Veteran
iTrader: (1)
Here is an article on that swap: https://www.therangerstation.com/tec...a-ford-ranger/
Google: ford ranger ecoboost swap
There are some videos
Quite a bit of fabrication is needed
Its the same block so same transmission can be used, if manual, not sure automatic can be used since you need a different computer
2006 might have a few more changes needed with the cluster/computer pairing
Google: ford ranger ecoboost swap
There are some videos
Quite a bit of fabrication is needed
Its the same block so same transmission can be used, if manual, not sure automatic can be used since you need a different computer
2006 might have a few more changes needed with the cluster/computer pairing
#6
Here is an article on that swap: https://www.therangerstation.com/tec...a-ford-ranger/
Google: ford ranger ecoboost swap
There are some videos
Quite a bit of fabrication is needed
Its the same block so same transmission can be used, if manual, not sure automatic can be used since you need a different computer
2006 might have a few more changes needed with the cluster/computer pairing
Google: ford ranger ecoboost swap
There are some videos
Quite a bit of fabrication is needed
Its the same block so same transmission can be used, if manual, not sure automatic can be used since you need a different computer
2006 might have a few more changes needed with the cluster/computer pairing
Thread
Thread Starter
Forum
Replies
Last Post
LittleBeauty
DOHC - 2.3L Duratec / Mazda L Engines
8
05-26-2022 01:16 PM
ChristianU1994
General Ford Ranger Discussion
4
08-19-2020 03:46 PM