2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

Acts like cruise is on in 4th or 5th gear only??

Old Jan 18, 2014
  #1  
Timco's Avatar
Thread Starter
|
Member
Joined: Jan 2014
Posts: 6
Likes: 0
From: Salt Lake City, Utah
Acts like cruise is on in 4th or 5th gear only??

'00 Ranger, 3.0, manual.

Just changed EGR sens, TPS, AIC, alt, batt, coolant sending unit, and cleaned MAF. Idle was sticking at 3k for several seconds. Truck runs way better than it has for a long time now, but here's the stumper.

In 4th or 5th gear ONLY, every time, it acts like cruise is on for 10-15 seconds before dropping off. If I push clutch in, it just starts to ramp up, but senses the clutch and drops the acceleration. I can't reproduce this in 1,2, or 3rd.

This happens with the CC cable disconnected and the throttle cable is fine. No mechanical binding or broken parts. Because the clutch kills this acceleration, it has to be electronic? Any thoughts why only 4th and 5th??

Thanks, Tim
 
Reply
Old Jan 24, 2014
  #2  
Timco's Avatar
Thread Starter
|
Member
Joined: Jan 2014
Posts: 6
Likes: 0
From: Salt Lake City, Utah
Followup....

BUY GENUINE MOTORCRAFT PARTS for your IAC and idle control sensors!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jakkrak
General Technical & Electrical
1
Mar 15, 2011 11:54 AM
instigator
2.9L & 3.0L V6 Tech
5
Dec 15, 2010 01:55 PM
Foxracin
Meets, Greets, & Events
10
Jun 26, 2010 07:24 AM
kaz
General Technical & Electrical
0
May 6, 2010 09:32 PM
vipertblck
Drivetrain Tech
2
Feb 19, 2010 02:48 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 12:03 PM.