I keep getting some odd ones, some of which Ron has mentioned don't exist on a ranger. Is there somewhere to check those? Car Scanner ELM OBD2
Version: 1.105.4/401054/GP
DTC report
Connection profile: Ford OBD-II / EOBDDate: 4/8/2024 2:54:06 PM
============================
OBD-IIOBD-II
DTCs: 8
----------------------------
P0306 [0x0306]
Cylinder 6 - misfire detected
Cylinder #6 Misfire Detected
Status: Confirmed
----------------------------
P0503 [0x0503]
Vehicle speed sensor (VSS) - intermittent/erratic/high input
Vehicle Speed Sensor Intermittent
Status: Confirmed
----------------------------
P0600 [0x0600]
CAN data bus - malfunction
Serial Communications Link Malfunction
Status: Confirmed
----------------------------
P0005 [0x0005]
Fuel shut-off valve - open circuit
Status: Confirmed
----------------------------
P0581 [0x0581]
Cruise control system, multi-function switch input A - circuit high
Status: Confirmed
----------------------------
P3B10 [0x3B10]
Status: Confirmed
----------------------------
P0440 [0x0440]
Evaporative emission (EVAP) system - malfunction
Evaporative Emission Control System Malfunction
Status: Confirmed
----------------------------
P3700 [0x3700]
Status: Confirmed

 

These are the most common Ford OBD2 codes: https://www.therangerstation.com/tec...trouble_codes/

P0xxx are generic OBD, all vehicle makers must use these using same definitions, P0306 misfire on #6 is the same on any make/model sold in the US/Canada

P1xxx, P2xxx, P3xxx are Car Maker specific, Ford P1234 code may have different meaning than GM or Toyota P1234 code

B, C and U codes are pretty much car maker specific

P3B10 doesn't look right, even P3810 is a stretch, P codes end at P3499

Not sure where you would get a full list, this site has most P type codes: https://www.obd-codes.com/trouble_codes/

 

I was just curious to know what exactly i got on there.





Kodi