4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

vapor lock

Thread Tools
 
Search this Thread
 
  #1  
Old 04-21-2019
kentucky's Avatar
Member
Thread Starter
Join Date: Apr 2019
Location: lancaster, ca
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
vapor lock

I have a 2001 4.0L. On hot days when I shut the engine off and try and start it, it will not start. Let it set for a couple hours it starts then runs fine. Engine temp appears normal. any suggestions?
No codes given.
 

Last edited by kentucky; 04-21-2019 at 05:57 PM. Reason: additional info.
  #2  
Old 04-21-2019
RonD's Avatar
RF Veteran
iTrader: (1)
Join Date: Jan 2014
Location: Vancouver, BC
Posts: 30,654
Received 2,820 Likes on 2,586 Posts
Welcome to the forum


1998 and up Rangers use 55psi fuel pressure so can't vapor lock, technically no fuel injection system can

Vapor lock was seen on older systems with fuel pumps at the engine so the fuel line back to the tank was at 0psi so gasoline could "boil" if fuel line got hot enough
If you add even 5psi pressure "boiling point" goes up too high for vapor lock

Do the 50/50 test next time its hot and you have a No Start
Spray gasoline or Quick Start(ether) into the intake and try to start engine
If engine starts and dies then you have no fuel getting into engine
If engine doesn't start then no Spark
50/50
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
surfsteve
4.0L OHV & SOHC V6 Tech
19
04-24-2019 03:34 PM
hydafl20
2.9L & 3.0L V6 Tech
14
11-17-2018 08:42 AM
fschaefer
Member Introductions
6
10-21-2018 08:58 PM
Wendylu
Member Introductions
1
03-15-2017 09:46 AM
Glenard
2.3L & 2.5L I4 Tech
2
07-27-2016 12:41 PM



Quick Reply: vapor lock



All times are GMT -6. The time now is 02:17 PM.