4 WD DEAD
#1
#2
Member
iTrader: (1)
Join Date: Mar 2011
Location: westminster,colorado
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I would put the truck up on jacks and put it into 4x4 to see if all 4 wheels spin. If only back wheels spin then look to see if the front drive cv axels are moving, if yes then hubs are bad. If the cv axel is not moving then shifter motor in t-case is bad. it could be the shifter controller in the cab, lose wires. hopes this helps!
#3
#4
What he said^ when you shift to 4x4 you should hear a small electric motor running. if not after checking fuses and connections I would replace the shift motor, its bolts on to the back of the tcase with 3 bolts, very simple to replace and fairly in expensive.
#5
#11
Thread
Thread Starter
Forum
Replies
Last Post
rngprerunner
General Ford Ranger Discussion
17
10-13-2022 09:41 AM
Glowin3232
General Technical & Electrical
1
06-07-2005 01:14 PM
FLPanther
General Ford Ranger Discussion
12
03-14-2005 05:41 PM