Parts compatibility
Yes
1993 Rangers to 2009 Ranger axles are the same bolt up to the truck
1994 Mazda B-series to 2009 are same as Rangers so can be exchanged, all things line up and bolt up
There were 2 sizes of rear axles, 7.5" and 8.8" they are also interchangeable in above years.
Rear axles do have a few Ratio options, i.e. 3.45, 3.73, 4.10, if you use a different ratio your speedometer will be off and you will need it calibrated to correct it
There were also OPEN type and Limited Slip type rear axles, interchangeable, but if your swapping in a new axle why not use Limited Slip if you can find it
Axle ID methods seen here: https://therangerstation.com/tech_li...le_codes.shtml
2010/11 Rangers had rear disc brakes and the rear axle had larger axle tubes, you can use them, just need different U-bolts and plates
1993 Rangers to 2009 Ranger axles are the same bolt up to the truck
1994 Mazda B-series to 2009 are same as Rangers so can be exchanged, all things line up and bolt up
There were 2 sizes of rear axles, 7.5" and 8.8" they are also interchangeable in above years.
Rear axles do have a few Ratio options, i.e. 3.45, 3.73, 4.10, if you use a different ratio your speedometer will be off and you will need it calibrated to correct it
There were also OPEN type and Limited Slip type rear axles, interchangeable, but if your swapping in a new axle why not use Limited Slip if you can find it
Axle ID methods seen here: https://therangerstation.com/tech_li...le_codes.shtml
2010/11 Rangers had rear disc brakes and the rear axle had larger axle tubes, you can use them, just need different U-bolts and plates
Last edited by RonD; Apr 24, 2019 at 07:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post



