Brake line size
#1
Brake line size
The brake lines from my master cylinder to the axles are complete RUST solid rust, welded to the fitting by rust etc. So I need to replace them. I figure I'll get a universal steel line kit with fittings. What size are the lines? There's 1/4" 1/8" 3/16" and 5/16" that I see in universal kits so far.
#2
#3
Thanks much
I need some specific help now. I have to replace the lines from the master cylinder to the rear where it meets the soft line, and from the master cyl to the front soft line. I am confused on what fittings I need. Some people say 3AN and some say 3/16th inverted flare and some say the master cyl fittings are different than the other ones. Could someone give me a list of the fittings I need? Thanks a lot. Its a 96 4x4 ex cab
Would this kit work?
http://www.jeeperz-creeperz.com/nylo...ne-p-7477.html
or is it these fittings?
http://www.jeeperz-creeperz.com/inve...ck-p-7471.html
I need some specific help now. I have to replace the lines from the master cylinder to the rear where it meets the soft line, and from the master cyl to the front soft line. I am confused on what fittings I need. Some people say 3AN and some say 3/16th inverted flare and some say the master cyl fittings are different than the other ones. Could someone give me a list of the fittings I need? Thanks a lot. Its a 96 4x4 ex cab
Would this kit work?
http://www.jeeperz-creeperz.com/nylo...ne-p-7477.html
or is it these fittings?
http://www.jeeperz-creeperz.com/inve...ck-p-7471.html
#5
Thanks much
I need some specific help now. I have to replace the lines from the master cylinder to the rear where it meets the soft line, and from the master cyl to the front soft line. I am confused on what fittings I need. Some people say 3AN and some say 3/16th inverted flare and some say the master cyl fittings are different than the other ones. Could someone give me a list of the fittings I need? Thanks a lot. Its a 96 4x4 ex cab
Would this kit work?
Jeeperz Creeperz: 48030 - Allstar Performance Nylon Brake Line Kit
or is it these fittings?
Jeeperz Creeperz: 50110 - Allstar Performance 3/16 Inverted Flare Nut, 10-Pack
I need some specific help now. I have to replace the lines from the master cylinder to the rear where it meets the soft line, and from the master cyl to the front soft line. I am confused on what fittings I need. Some people say 3AN and some say 3/16th inverted flare and some say the master cyl fittings are different than the other ones. Could someone give me a list of the fittings I need? Thanks a lot. Its a 96 4x4 ex cab
Would this kit work?
Jeeperz Creeperz: 48030 - Allstar Performance Nylon Brake Line Kit
or is it these fittings?
Jeeperz Creeperz: 50110 - Allstar Performance 3/16 Inverted Flare Nut, 10-Pack
The first kit won't work. The second link is what you want. The actual thread on those nuts are 3/8-24...so if you hold up a 3/8-24 bolt up and the threads look like they match, it is for sure a 3/16 tube inverted flare.
Thread
Thread Starter
Forum
Replies
Last Post
For Sale: extended stainless rear brake line
rkneeshaw
OLD - Engine & Drivetrain
2
04-06-2011 06:23 AM
zabeard
General Ford Ranger Discussion
11
02-11-2008 05:22 PM
stockranger
General Ford Ranger Discussion
8
09-28-2007 10:02 PM
james13f
Audio & Video Tech
2
04-22-2005 08:45 AM