Door handle and latch assembly
#1
Door handle and latch assembly
Does anyone have a detailed drawing of the inner assembly of the door handle and latch system? Specifically I'm looking to see if there is a grommet in the hole where the rod to the outer handle connects. I know there is a clip there, but is there a bushing or grommet as well?
I just replaced the clip and there is still substantial slop in the mechanism. Thanks in advance.
I just replaced the clip and there is still substantial slop in the mechanism. Thanks in advance.
#3
My outer handle does not have the metal tab/bushing at all. It has THIS STYLE and I think there is a significant amount of play in the slot. What I'm looking for is on the other end of the rod. Where the rod connects to the latch, there is a retaining clip. Is there a bushing in the latch hole where the retaining clip gets inserted?
#5
Replacing the door handle? I would say anyone with common sense and some basic tools would be able to tackle it, no problem.
#7
#9
We run the old Ranger (we call him "tuffy"). 244k miles here at https://www.escondidojunk.com/about-us.html Might be our top money maker. Fords are built like tanks.. even the small trucks.
Thread
Thread Starter
Forum
Replies
Last Post
maxpower3
General Technical & Electrical
7
03-27-2018 04:18 PM