General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

2010 to get REAR disc Brakes!

Old Oct 20, 2009
  #26  
btm757's Avatar
Member
iTrader: (5)
Joined: Jun 2009
Posts: 3,980
Likes: 2
From: Norfolk / Chesapeake, VA
Originally Posted by Dangerranger01
Sweet!! I wonder if they really are vented like the picture shows. I also find it weird that there are two brake lines coming down from the frame, is that for the special brake change thing?
I believe it is for the RSC... Cause it uses the brakes to help keep you from rolling
 
Reply
Old Oct 20, 2009
  #27  
rngprerunner's Avatar
Member
Joined: Jun 2004
Posts: 3,453
Likes: 10
From: Long Beach CA
Originally Posted by rngprerunner
And the two brake lines are for the brake biased traction control and roll stability control systems. Its so that the computer can brake each wheel individually.
Originally Posted by btm757
I believe it is for the RSC... Cause it uses the brakes to help keep you from rolling
I already explained it... lol

And I must say, I was wrong. I still can't believe there is no literature on this, officially from Ford anyway, since it's a huge deal. Or maybe it's just a big deal to us and not to the rest of the world. But here it is... rear disks on a 2010 Ranger.

 
Reply
Old Oct 20, 2009
  #28  
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Joined: May 2005
Posts: 21,721
Likes: 17
From: Boring, Oregon
looks to me like it's a modified explorer set up... now it makes me wonder why they ditched the 31spline ranger axle?? or maybe it just makes be think that RSC is the reason they ditched the 31spline. now that both 7.5 and 8.8 get the same brakes, which makes them directly swappable with eachother, 31spline are not. Looks like they rotated the brake mounting flange too.
 
Reply
Old Oct 20, 2009
  #29  
Toms994x4's Avatar
Member
iTrader: (4)
Joined: Jul 2009
Posts: 1,300
Likes: 0
From: Sanford, NC
From a guy on TRS:
2010 Ranger gets FACTORY rear disc brakes - The Ranger Station Forums
 
Reply
Old Oct 20, 2009
  #30  
RangerNDog's Avatar
Member
iTrader: (10)
Joined: Aug 2008
Posts: 1,958
Likes: 2
From: Harrisonburg, VA
Man I want rear discs!
 
Reply
Old Oct 20, 2009
  #31  
GrafixGuy's Avatar
RF Veteran
iTrader: (3)
Joined: Jan 2005
Posts: 8,703
Likes: 2
From: Montgomery, AL
time to go to the dealership. lol

* IF I ever get another ranger it will be the coil sprung version.
 
Reply
Old Oct 20, 2009
  #32  
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Joined: May 2005
Posts: 21,721
Likes: 17
From: Boring, Oregon
Originally Posted by GrafixGuy
time to go to the dealership. lol

* IF I ever get another ranger it will be the coil sprung version.
AND 2.3L...


sucks you can't get a 2wd with a 4.0 anymore. :(

(at least I think i'm right?)
 
Reply
Old Oct 20, 2009
  #33  
ClubFoot's Avatar
Member
Joined: Sep 2008
Posts: 269
Likes: 0
From: San Diego, Cailfornia
What happened to the FX4?!
 
Reply
Old Oct 20, 2009
  #34  
dangelj316's Avatar
Member
iTrader: (1)
Joined: Feb 2006
Posts: 813
Likes: 0
From: Yuma, AZ
I wonder if we could purchase all the 2010 hardware to swap ours over to disc??? Anybody work at Ford, that could find out the cost?
 
Reply
Old Oct 20, 2009
  #35  
KLC's Avatar
KLC
RF Veteran
iTrader: (29)
Joined: Nov 2007
Posts: 13,115
Likes: 5
From: New Mexico
Originally Posted by dangelj316
I wonder if we could purchase all the 2010 hardware to swap ours over to disc??? Anybody work at Ford, that could find out the cost?
I was wondering the same thing, although it is probably cheaper to go aftermarket.
 
Reply
Old Oct 20, 2009
  #36  
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Joined: May 2005
Posts: 21,721
Likes: 17
From: Boring, Oregon
Originally Posted by ClubFoot
What happened to the FX4?!
axed/dropped.

Originally Posted by dangelj316
I wonder if we could purchase all the 2010 hardware to swap ours over to disc??? Anybody work at Ford, that could find out the cost?
you could....but DAMN the price wouldn't be nice. It's alot cheaper and alot easier to do mustang or Cobra brakes. Damn near a bolt-on process. And based upon the diagrams straight from Ford posted above, it would NOT be doable to a 09 and older axle because of the brake mounting flanges on the axle. Check out Dangerranger01's project log for disc swap on 28spline on the cheap(pretty much).
 
Reply
Old Oct 20, 2009
  #37  
dangelj316's Avatar
Member
iTrader: (1)
Joined: Feb 2006
Posts: 813
Likes: 0
From: Yuma, AZ
Probably. . . but we'll see. Maybe i'll swing down to Ford tomorrow.
 
Reply
Old Oct 20, 2009
  #38  
SVT01RANGER's Avatar
Member
iTrader: (2)
Joined: Jun 2004
Posts: 3,635
Likes: 4
From: West Eugene, OR
i was on the fordvehicles site,a dn i noticed in the building part the interior has a level II shifter... probally a generic pic, but i thought they axed the LVL II a couple years ago
 
Reply
Old Oct 20, 2009
  #39  
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Joined: May 2005
Posts: 21,721
Likes: 17
From: Boring, Oregon
Originally Posted by SVT01RANGER
i was on the fordvehicles site,a dn i noticed in the building part the interior has a level II shifter... probally a generic pic, but i thought they axed the LVL II a couple years ago
It may be a '09 build page....'2010 is now up as of at least yesterday when I was on it. None of the pics I saw yesterday had the chrome shifter or the Fx4 gauges. The Fx4 LI/LII hybrid package(called simply Fx4 Off Road) with manual still got the chrome shifter in '09, now that the Fx4 package is gone, I assume the chrome shifter is gone as well.
 
Reply
Old Oct 20, 2009
  #40  
04blackedge's Avatar
RF Veteran
iTrader: (13)
Joined: Jan 2007
Posts: 23,426
Likes: 8
From: Durham, NC
Originally Posted by Fx4wannabe01
It may be a '09 build page....'2010 is now up as of at least yesterday when I was on it. None of the pics I saw yesterday had the chrome shifter or the Fx4 gauges. The Fx4 LI/LII hybrid package(called simply Fx4 Off Road) with manual still got the chrome shifter in '09, now that the Fx4 package is gone, I assume the chrome shifter is gone as well.
It shows it there during the build and price page too
 
Attached Thumbnails 2010 to get REAR disc Brakes!-screen-shot-2009-10-21-1.11.15-am.jpg  
Reply
Old Oct 20, 2009
  #41  
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Joined: May 2005
Posts: 21,721
Likes: 17
From: Boring, Oregon
Originally Posted by 04blackedge
It shows it there during the build and price page too
OWNED by morgue anne! lol.

I'm still leanin towards that being a generic pic....it's even got the vinyl floor of the Fx4. OH! And it has an incorrect cubby below the radio bezel. There's the aux input and a keyed hole on 2010's...I'm thinking curtain airbag shutter offers? Ford 2010 site ain't letting me blow up the gallery page. Makes me wonder if XLT's get carpet or vinyl now...hmm...trip to the dealer to solver my grille inquiries and the vinyl floor on an XLT...


*sorry Trent if you don't like my nickname for ya! let me know i'll edit it!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ranger_Chris
Wheels & Tires Semi-Tech
14
Jan 8, 2012 10:56 PM
hampster_1
General Ford Ranger Discussion
37
Aug 16, 2010 09:57 PM
TBarCYa
General Ford Ranger Discussion
16
Oct 22, 2005 01:03 PM
TBarCYa
General Technical & Electrical
16
May 10, 2005 09:31 AM
TBarCYa
Drivetrain Tech
32
Jan 3, 2005 07:41 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 01:05 AM.