Im troubleshooting my manual 99 ranger regular cab, my 4x4 and cab dome light werent working. Now they work since I ran a jumper wire from fuse 27 (tcs, drl module, dtr sensor, pulse vacuum hublock solenoid) to one of the wires on the dimmer wheel. Thankfully the 4x4 works now, but the cab dome light only works when the key is in "on" position. Any kind of wiring diagram or answers on how to fix this issue properly??

 

Fuse 27 only has power with key ON, so that would make sense

Interior lighting diagram below


The 4wd lights are powered by pin5 C214 via main light switch, orange/black stripe wire