Hey guys should I have power to this ? I have power coming in on the other 2 .

 

What are the wire colors?

in 1994 I have a white/red wire for hazards that should have 12volt all the time, thru hazard flasher from fuse #4

And a light blue wire for turn signals, 12volt but only with key on, from turn flasher and fuse #5


There is also a Dark blue/orange wire with 12v all the time, thats the "flash to pass" high beam power
And a red/yellow wire for low beams, has 12v with head light switch on

Diagram here for turn and hazards

 

Ron, I am assuming the white & red wire? On my 4 prong plug I have power with key on and off to the red wire,

 

Also I have power to the hazard / flasher fuse and have replaced it,

 

A Red wire at the Multi-function switch should be for windshield wipers, but should only be powered with key on, fuse #2

Yes white/red wire should have power all the time for hazard flashers

 

Thanks for the help Ron tracked it down. Lose wire on 552 fuse panel

 

Good work

Thanks for the update