General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Dead Radio

Thread Tools
 
Search this Thread
 
  #1  
Old 09-03-2018
wlupo's Avatar
Member
Thread Starter
Join Date: Sep 2018
Location: CALABASH
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Dead Radio

Hi all, new member,
just picked up a 99 ranger for the misses, Have not owned a truck in a long time!!
Radio is dead no light/sound nothing
I have pulled and checked the fuse
where you reccommend i start next??
under the hood, under the fuse box, under the dash?
I have installed many a radio in my day but never repaired one
is this a common problem with the ranger or am i just unlucky.
just hoping to get some quick hints/answers before i start just
tearing stuff apart, THANKS
 
  #2  
Old 09-03-2018
2011Supercab's Avatar
Member
Join Date: Jun 2018
Location: Everett, WA
Posts: 2,096
Received 327 Likes on 278 Posts
It's only 2 screws to pull the radio and bezel out in 1 unit, I'd check to see if radio is even plugged in. Screws are just above heater control *****.

Previous owner may have had aftermarket radio installed, and just stuffed factory radio back into it to sell or trade in.
 
  #3  
Old 09-03-2018
bigdavyp's Avatar
Member
Join Date: Jun 2017
Location: Casey, IL
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Check/replace #20, #28, and #29 interior fuses.
 
  #4  
Old 09-05-2018
wlupo's Avatar
Member
Thread Starter
Join Date: Sep 2018
Location: CALABASH
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
thanks for the tips, i will knock these out first, did not know >1 fuse to chck THANKS
 
  #5  
Old 09-06-2018
wlupo's Avatar
Member
Thread Starter
Join Date: Sep 2018
Location: CALABASH
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts



all 3 fuses good, unhooked and reattached wiring and heard cd player turning so i think it is getting power, face swung open when i removed the bezel, this about as far as i can ope it without feeling like somethings going to break. any ideas??
 
  #6  
Old 09-07-2018
2011Supercab's Avatar
Member
Join Date: Jun 2018
Location: Everett, WA
Posts: 2,096
Received 327 Likes on 278 Posts
Originally Posted by wlupo

face swung open when i removed the bezel, this about as far as i can ope it without feeling like somethings going to break. any ideas??
There's your problem, The face plate is NOT supposed to do that.
 
  #7  
Old 09-07-2018
A7thson's Avatar
Member
Join Date: Jun 2018
Location: Mount Carmel, Pa
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
I'd just go with a new radio, Standard ones without all the add ons aren't that expensive
 
  #8  
Old 09-09-2018
wlupo's Avatar
Member
Thread Starter
Join Date: Sep 2018
Location: CALABASH
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
RESOLVED......................CANT DELETE
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2WheelJon
Audio & Video Tech
10
09-24-2020 11:02 AM
Fordgang
General Ford Ranger Discussion
2
08-02-2018 09:42 AM
jimhenry
General Technical & Electrical
1
08-13-2013 07:12 PM
crawly1025
Interior Semi-Tech
27
03-26-2007 10:59 AM
NHBubba_Revisited
Audio & Video Tech
8
07-20-2005 11:43 PM



Quick Reply: Dead Radio



All times are GMT -6. The time now is 10:28 PM.