General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Battery Light Question

Old Jan 3, 2008
  #1  
NVR2FST's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 27
Likes: 0
From: MI
Battery Light Question

I just changed my t-stat and hoses and went for a test ride, when half way through the battery light went on. I checked it with a meter and the battery is showing about 12.5v (not running) and 14.4v running (even if I rev the engine).

Any idea on why the light would be on if the regulator/ alt./ and battery seem to be ok??
 
Reply
Old Jan 3, 2008
  #2  
Rev's Avatar
Rev
Member
Joined: May 2005
Posts: 1,179
Likes: 8
From: San Diego, CA
Check all the alt connections making sure they're fully plugged in and or tight. Double check any other connections you may have unplugged replacing the thermostat.
 
Reply
Old Jan 3, 2008
  #3  
NVR2FST's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 27
Likes: 0
From: MI
Yeah, I did that and everything looks good. I did charge the battery and the light is now off. I guess I'll drive it to see if it drains again, or just get the battery tested to see if it's that or the alt...probably the battery since it's an old Optima I stole out of my drag car.
 
Reply
Old Jan 4, 2008
  #4  
Rolldogg's Avatar
Member
Joined: Jan 2006
Posts: 3,424
Likes: 5
From: Ottawa, Ontario
When it's cold out, usually happens after left out overnight, the battery light will blink. The odd time it'll come on for a bit, but go away after I restart the truck. It used to do it more a couple years back.
Chances are you're battery might be going out. I haven't replaced the battery in mine and I'm not sure if the previous owner did. I've had it for 4 years now.
 
Reply
Old Jan 4, 2008
  #5  
lifted97ranger's Avatar
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
here is a little suggestion.......when i changed my t-stat i got the same light and also metered the battery just like you did.....come to find out, i didn't re-install the drive belt...check that...
 
Reply
Old Jan 4, 2008
  #6  
NVR2FST's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 27
Likes: 0
From: MI
Never pulled the belt....
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dadof2
General Technical & Electrical
8
Dec 6, 2010 02:39 PM
SariahLeah
SOHC - 2.3L & 2.5L Lima Engines
2
Jun 4, 2010 03:16 PM
RangerSkippyRoo
General Technical & Electrical
3
May 25, 2009 10:25 AM
buggman
General Technical & Electrical
1
Nov 19, 2008 11:00 AM
onebluemcm
Audio & Video Tech
12
Apr 13, 2007 03:48 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 08:39 PM.