Hello, I am struggling to find a replacement rear axle bearing seal for my 2011 Ranger XLT, 6cyl, 4wd. It has a 8.8 rear end w/ disc brakes. I am in process of replacing the bearing and seal and cannot find the correct seal at any local auto parts store or online. The shaft diameter where the seal seats is 1.62 OD measured with my calipers, the axle shaft has 28 splines. Can someone help with this?

 

The 2010/11 Ranger rear axles were different

"2010-2011 28-spline 8.8-Inch axles use the larger 1559 bearing ID= 1.618", OD= 2.533"

The 31-spline Explorers and F-150 also used the same bearing size, IIRC