General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Chatter when first moving forward

Old Jun 10, 2015
  #1  
ranger-2002's Avatar
Thread Starter
|
Member
Joined: Jun 2014
Posts: 14
Likes: 0
From: Ayer, MA
Chatter when first moving forward

Hello
I get chatter/vibration when I go from stop to moving forward such as at a stop light. I have an automatic transmission, 4x4, 4L, 2002, and ext cab. The chatter seems to be worse when I start off into a turn. It also seems to be getting worse with time. I used the truck to plow my driveway this past winter with a light weight snoway plow. I had no problems doing this. I am trying to figure out what can cause the chatter and then have the problem checked out. Any suggestions?
Thank you.
 
Reply
Old Jun 10, 2015
  #2  
RonD's Avatar
RF Veteran
iTrader: (1)
Joined: Jan 2014
Posts: 30,635
Likes: 2,952
From: Vancouver, BC
Not an automatic trans guru, but it could be torque converter clutches are slipping on lockup.
When you come to a stop the computer unlocks the torque converter, when you press down on the gas pedal computer locks it up again.

Could just be time for a change of filter and fluid in the trans.


If it only does it on start up turning then it probably isn't a Trac Lok differential issue, the Limited Slip differentials require an additive, or oil with additive already added, so the clutches can slip a bit when turning.
Without the additive you will get chatter when turning at lower speeds.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sierra Invenio
Member Introductions
9
Aug 31, 2023 11:43 AM
Kysus
Interior Semi-Tech
5
Apr 30, 2011 11:25 AM
wellcom2knoxvile
General Ford Ranger Discussion
14
Jun 18, 2010 11:43 AM
meatloaf
Drivetrain Tech
6
Jun 10, 2005 07:43 PM
swatcop169
4.0L OHV & SOHC V6 Tech
4
Sep 2, 2004 11:08 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 10:51 PM.