coolant gage differences?
Thread Starter
|
Member
Joined: Mar 2010
Posts: 41
Likes: 0
From: Phoenix, AZ
coolant gage differences?
I just put a 99 tach cluster into my 95 XLT 4.0
Basically everything works fine except the temp gage which varies between 3/4 and 7/8 and occasionally triggers the CHECK GAGES light. I'm thinking it is much more responsive than the original gage, BUT at too high a point.Does anyone know if the sender on the engine changed between 95 and 99? Could I just get a sensor for a 99 4.0 and screw it into the engine and plug the connector back on and have a correct reading temp gage? I really don't want to pull the cluster back out. I don't mind the high reading, but if my wife ever borrows the truck, I'll get a phone call.
Basically everything works fine except the temp gage which varies between 3/4 and 7/8 and occasionally triggers the CHECK GAGES light. I'm thinking it is much more responsive than the original gage, BUT at too high a point.Does anyone know if the sender on the engine changed between 95 and 99? Could I just get a sensor for a 99 4.0 and screw it into the engine and plug the connector back on and have a correct reading temp gage? I really don't want to pull the cluster back out. I don't mind the high reading, but if my wife ever borrows the truck, I'll get a phone call.
Thread
Thread Starter
Forum
Replies
Last Post
CadiLLacPimPin
General Ford Ranger Discussion
8
Jan 23, 2007 07:57 PM
Fx4wannabe01
General Ford Ranger Discussion
7
Dec 10, 2005 03:51 PM
rngprerunner
General Technical & Electrical
10
Oct 10, 2005 03:31 PM
