Truck started shaking real bad
#28
#29
Then its not the coil pack.
Let me get this straight, while the engine was running, you removed the plugs from the spark plugs and only #5 didn't change the idle?
If the coil pack is sending a voltage but the new spark plug still isn't firing, then I'm lost. Maybe your gap is incorrect, or the wire is shot. Maybe you're not getting compression?
I am by no means a mechanic.....
-Levino
Let me get this straight, while the engine was running, you removed the plugs from the spark plugs and only #5 didn't change the idle?
If the coil pack is sending a voltage but the new spark plug still isn't firing, then I'm lost. Maybe your gap is incorrect, or the wire is shot. Maybe you're not getting compression?
I am by no means a mechanic.....
-Levino
#30
Correct.
The #5 was the only one that didnt change idle.
I checked the gap and it was correct.
I was searchingearlier and found that you can spray water little mist's over the wires to see if the wires are bad.
I will try that.
Maybe a bac cylinder or something else. I am going to take it to a local dealer and they can figure it out.
The #5 was the only one that didnt change idle.
I checked the gap and it was correct.
I was searchingearlier and found that you can spray water little mist's over the wires to see if the wires are bad.
I will try that.
Maybe a bac cylinder or something else. I am going to take it to a local dealer and they can figure it out.
Thread
Thread Starter
Forum
Replies
Last Post
LayingFrame89
Ranger Products, Company, & Member Reviews
34
12-01-2007 06:59 AM
ranger
General Ford Ranger Discussion
32
07-31-2007 11:50 AM