anther neon ?
anther neon ?
ok my dome light didnt work so i am by passing it with 2 green neon under the seat and they work like they are suppose too and only took about 10 minutes to do...but my question is can i have them tied into the dome circuit and have a switch so i can control it or do i have to run another feed from another power source to do that?
Member
Joined: Oct 2006
Posts: 32
Likes: 0
From: Northeast, PA
I was just playing around with this kinda thing. I put two 15" green neons (not StreetGlows) under the dash, and two 15" in the back, under the jumpseat areas...super-bright, and pretty UFO-looking color! I then took out the three lights on the dome, went and got some green engine enamel. Made sure to tape up the metal/connection parts really good and then gave them a few good quick sprays. Next day, put the newly-colored-green lights back in the dome. The color matches the neons perfectly.
Now, what I did was get it wired so that the 4 'floor' neons came on with the dome light, as soon as you open the door. They then go out once you're inside. It's very easy to wire it so that when you turn on the switch for the dome, the neons come on as well. This is on a 2001 XLT. I dunno if I'm explaining that right- on the left side, there's the switch that turns your gauges brighter or dimmer and if you push it all the way on, then the dome lights all come on- that's stock. Now, you can wire it so that the neons will come on at the same time as that dome (which is cool-looking when they're all the same color)....
Now, what I did was get it wired so that the 4 'floor' neons came on with the dome light, as soon as you open the door. They then go out once you're inside. It's very easy to wire it so that when you turn on the switch for the dome, the neons come on as well. This is on a 2001 XLT. I dunno if I'm explaining that right- on the left side, there's the switch that turns your gauges brighter or dimmer and if you push it all the way on, then the dome lights all come on- that's stock. Now, you can wire it so that the neons will come on at the same time as that dome (which is cool-looking when they're all the same color)....
i tried to get them wired in on my dome light and it worked for one day and then the next my dome lights stayed on....even cleaned the door sensors...i think i might have shorted something out somewhere...all my fuses are ok
Originally Posted by Biz
i got 3 on my dome light right now..its ok..i just used a 25 fuse instead of the 15..works great..when i open my doors it lights up..and when i activate the dome light all of them go on..
Thread
Thread Starter
Forum
Replies
Last Post
