I have a 2006 Ranger Sport 4x4. The seats are both bucket. Not a 60/40. The center bracket was starting to get 'wiggly'. So I tore it apart and found a couple of the bolts had detached from the casting. Is this a common problem? I know I can fix it myself but was wondering if anybody else has had this problem. Attached is a picture or the console bracket.

 

Can't say I've seen that happen often, but it is only aluminum. When you put it back together I would put some loctite on the studs so that the nuts don't come loose again. And make sure the studs haven't come loose from the floor.