OHC question.
#1
#3
#4
Map function of the console:
Power from the green/orange is controlled by the 2 map switches to allow the 2 bulbs to act as map lights that can be turned on or off individually.
(Light green/orange of console tapped into light green/orange of the factory Ranger dome.)
Dome function of the console:
Power from the black/light blue bypasses the map light switches to turn on both console bulbs when the factory dome is powered.
(Black/light blue of console tapped into black/light blue of factory Ranger dome.)
If your factory dome works and the dome function of the console does not, then it is either miswired or something is wrong with the console.
Power from the green/orange is controlled by the 2 map switches to allow the 2 bulbs to act as map lights that can be turned on or off individually.
(Light green/orange of console tapped into light green/orange of the factory Ranger dome.)
Dome function of the console:
Power from the black/light blue bypasses the map light switches to turn on both console bulbs when the factory dome is powered.
(Black/light blue of console tapped into black/light blue of factory Ranger dome.)
If your factory dome works and the dome function of the console does not, then it is either miswired or something is wrong with the console.
#5
#6
#8
#10
The red/black color code is used on the later Explorer consoles. It is for the dimmer feature, the equivalent of the light blue/red called out in the how to.
#11
Thread
Thread Starter
Forum
Replies
Last Post
MugenCRX04
OLD - Interior, Exterior, Electrical, & Misc.
12
09-29-2009 03:18 PM