Big04Ranger's SAS Thread
Thread Starter
|
Member
Joined: Nov 2005
Posts: 756
Likes: 0
From: Avon, IN
not really... just cut the stock ranger and the stock yota in half, there is a spot on each the is a 1" diameter.. the lil piece of tube that you see is 1" inner diameter.. made my BL extention mate to the steering column(not shown in this pic).. took about 10 minutes in all
Thread Starter
|
Member
Joined: Nov 2005
Posts: 756
Likes: 0
From: Avon, IN
Originally Posted by zabeard
what the heck are you doing...
you cut the wrong side of the ranger shaft....
oh and good luck with that yota box... i moved mine again today. i like it much better. just need to drive it now.
you cut the wrong side of the ranger shaft....
oh and good luck with that yota box... i moved mine again today. i like it much better. just need to drive it now.
nah she bolts up just fine.... there is a piece thats being used that not in that picture
Thread Starter
|
Member
Joined: Nov 2005
Posts: 756
Likes: 0
From: Avon, IN
whelp truck is on its own weight finally.. this is the 3rd time iv had the buckets mounted as i just was not happy where and what the coils were doin.. im 99% sure they are staying in this location
Thread Starter
|
Member
Joined: Nov 2005
Posts: 756
Likes: 0
From: Avon, IN
Originally Posted by ranger
yea only half a foot taler
btw.. rear right now its sitting 2" lower then RCD and 37s.. front is sitting 4" taller right now...hehe
