Dewey's 05 Edge Build & SAS
#361
Well I got the new seats in and have been enjoying them for a week now. So glad I switched them out infinitely better than stock and a good improvement over the low back mountaineer seats.
On to the pictures...
You can see my axles in the background.
I got them all installed and when I got in, I realized I needed to have it sit down an inch and a half lower so my head would stop hitting the roof. Apparently the tracks on the driver side sit down that much further than the passenger.
Once the driver was cut down and welded back up it fits perfect.
Now I'm needing to research what Pedro used to dye his explorer seats black so I can do these the same way. The budget isn't there right now to be reupholstered, but the leather is still in pretty good shape, so it'll be livable for quite some time.
On to the pictures...
You can see my axles in the background.
I got them all installed and when I got in, I realized I needed to have it sit down an inch and a half lower so my head would stop hitting the roof. Apparently the tracks on the driver side sit down that much further than the passenger.
Once the driver was cut down and welded back up it fits perfect.
Now I'm needing to research what Pedro used to dye his explorer seats black so I can do these the same way. The budget isn't there right now to be reupholstered, but the leather is still in pretty good shape, so it'll be livable for quite some time.
#369
Well I sent off my output shaft from the 5 speed a week ago to be machined. Aparrently there was a difference in the shaft diameter of 2nd and 3rd gears. Hopefully get it back within a week to put the 5 speed back together that has been sitting apart for a week now. Just gotta remember how to put it all back together.
Also decided to play around with my underglow and get a night shot. Not bad for like $40 in parts.
Also decided to play around with my underglow and get a night shot. Not bad for like $40 in parts.
#370
Output shaft will be back tomorrow and my T case output adapter to a 3010 joint will be here today.
took some time last week to take the Escape seats out and dye them black. And let me tell you, SEM Classic Coat is some awesome stuff! same exact stuff Pedro (99offroadrngr) used in his 04. Very happy with them and for $12.75 a can, it is amazing. And have I mentioned how much better these seats are than the Mountaineer ones?
You can see for yourself.
took some time last week to take the Escape seats out and dye them black. And let me tell you, SEM Classic Coat is some awesome stuff! same exact stuff Pedro (99offroadrngr) used in his 04. Very happy with them and for $12.75 a can, it is amazing. And have I mentioned how much better these seats are than the Mountaineer ones?
You can see for yourself.
Last edited by Dewey; 07-05-2016 at 10:20 AM.
#373
Thank you
There was one small spot that flaked off, but I don't think I prepped that spot very well. So I re wiped it with rubbing alcohol and then re sprayed it and haven't had a problem since.
There was one small spot that flaked off, but I don't think I prepped that spot very well. So I re wiped it with rubbing alcohol and then re sprayed it and haven't had a problem since.
Last edited by Dewey; 07-05-2016 at 12:05 PM.
#374
Update time! Haven't done much of anything lately. Just started fulltime for O'Reilly as a commercial manager. Pay is much better than before and I'm getting tons of OT.
As far as the truck goes, I did tackle one mod today that I've been wanting to do for a while. My AVIC D3 pioneer head unit has been on its way out for over a year. The software glitches and resets have been irina ting to say the least. I looked into getting a newer 7" unit like the 4200NEX, but really didn't feel like spending $600 not to mention my wife would have killed me, so I started researching some other alternatives and landed on this.
And then I had to figure out how to get the sound to my amps and found this nifty little dude called a Digital Signal Processor.
Then I had to figure out how to program it for my needs and after talking to the software developer for an hour, got it set about perfect.
Then came the install and with the knowledge of how to use the tuning software, was able to get it to sound quite nice. I have no pictures of during the install, but only have the final result.
As far as the truck goes, I did tackle one mod today that I've been wanting to do for a while. My AVIC D3 pioneer head unit has been on its way out for over a year. The software glitches and resets have been irina ting to say the least. I looked into getting a newer 7" unit like the 4200NEX, but really didn't feel like spending $600 not to mention my wife would have killed me, so I started researching some other alternatives and landed on this.
And then I had to figure out how to get the sound to my amps and found this nifty little dude called a Digital Signal Processor.
Then I had to figure out how to program it for my needs and after talking to the software developer for an hour, got it set about perfect.
Then came the install and with the knowledge of how to use the tuning software, was able to get it to sound quite nice. I have no pictures of during the install, but only have the final result.