Rockerarm shaft bolts e800544?????
Your right, I don't see them listed for sale any where
Ford has them but expensive
You could call some wrecking yards and see if they have a 4.0l OHV parts engine
A machine shop may be able to source them, get the thread and size from manuals, 4.0l OHV was made from 1990-2000 and used in a few Ford and Mazda models
Worst case is get one from Ford and then get the other 5 from a place like Graingers
The diameter of the bolts is critical since the center bolt on both sides has the oil feed running up from the head so you don't want to block that
Ford has them but expensive
You could call some wrecking yards and see if they have a 4.0l OHV parts engine
A machine shop may be able to source them, get the thread and size from manuals, 4.0l OHV was made from 1990-2000 and used in a few Ford and Mazda models
Worst case is get one from Ford and then get the other 5 from a place like Graingers
The diameter of the bolts is critical since the center bolt on both sides has the oil feed running up from the head so you don't want to block that
Thread Starter
|
Member
Joined: Jan 2019
Posts: 5
Likes: 0
From: Waynesboro
For future reference.
So after biting the bullet and buying the bolts 33 dollars a pop from ford. Found this number on the receipt... f77z 6a527 aa. And found them at tasca parts. For 18.90 a piece. For those of you needing them... save yourself the trip to ford!
Member
Joined: Mar 2016
Posts: 3
Likes: 0
From: mentor, ohio
go yo www.boltdepot.com
F4DZ-6A527-A
order Metric M10 x 1.50 x 60mm cap screw 10.9 hardened only $1.74Last edited by don9084$; May 4, 2022 at 01:01 PM. Reason: wrong sioze
Thread
Thread Starter
Forum
Replies
Last Post
Devinish87
General Ford Ranger Discussion
0
Jan 10, 2019 07:34 PM
