Hey Guys, I was wondering if any one could tell me how to wire up the power lumbar only from my Explorer seats. I took it out yesterday and couldn't seem to figure out how to do it. There is the Red wire that goes directly from the pump to the switch and a black that goes from the pump to a plug and a black w/ white stripe that goes from the switch to that same plug. I got it to work both ways by switching the wires from the + and - to deflate and inflate bu nothing from the switch nor do I know how to wire it up correctly. I thought maybe someone could help me out with this.

 

BK/WT from switch = power
BK from pump moter = ground