Bilstien 5100 question...important!!! Blew my shock out
#1
Bilstien 5100 question...important!!! Blew my shock out
Ok i was wanting to run some 2.0 resis on my rig but this morning i blew out my drivers Fabtech 2.5" shock(supposed to be for 2.5" of lift), upon removing my passenger side i realized that it was a half inch from bottoming out at ride height. im looking at the BE5-E675-HO Bilsteins, but they say they are for 3" lift, ive looked everywhere and i cant find any extended or collapsed lengths for them nowhere. what im wanting to know is are they going to be too long since i only have 2.25" springs?? i need some shocks with the quickness and i can pick them up at Summit farely cheap
#5
Fox prt#Fox980-99-272-A
bilstein prt#BE5-E675-HO
if the fox's are a strait drop in deal i would prolly rather go with them, but my shocks have a metal tab running thru the bottom eye so it can be mounted on the studs on the LCA, will the fox's come with those metal tabs? if not i dont see how they would work they dont look to have a bushing
bilstein prt#BE5-E675-HO
if the fox's are a strait drop in deal i would prolly rather go with them, but my shocks have a metal tab running thru the bottom eye so it can be mounted on the studs on the LCA, will the fox's come with those metal tabs? if not i dont see how they would work they dont look to have a bushing
#7
#8
im running the pro comps right now until i have the money for bilsteins. there are for stock height and every time i hit a bump theres a loud boom from them extending all the way out. but anyways last time i was at summit i checked on shock that are for like 2-3 inches of lift and pro comp does make a few. es 1000s es 3000s and es 9000s i believe. summits only a 15 minute ride for me
#9
#10
aight my shocks now are around 14.3" extended 9.5 compressed...ive pms and email orw waiting for their response...ill give fox a call tomorrow because ive hear their junk is the shizzle...ive also been gettin the loud bump and a s***y ride...lowereed tire pressure and it alot better but not like it should be
Thread
Thread Starter
Forum
Replies
Last Post